User's Manual

Tally Dascom DL-210 User Guide V1.3

(5) Unlatch the print head mechanism by

pushing the two blue locking buttons on the

sides toward the rear.

(6) Lead the media under the print head

mechanism through the media guides.

(7) Control the blue media guide adjustor so as

to align the media in the central path.

(8) Lead the media over the platen roller and

through the tear bar.

(9) Put the print head mechanism down and

press down firmly until you hear a snap.

(10) Close the top cover and turn on the

printer or press the “FEED” button if the

printer is already on.

(11) In order to make sure the data is printed within the label area, it is necessary to execute

Label Calibration: Hold down Feed Key and switch on printer simultaneously, release Feed

Key after the buzzer beeps twice. Then the label will be positioned automatically.

Label calibration should be executed in the following situations:

 Use printer for printing label first time.

 Replace different size of labels.

 Printer skips labels

 Printer feeds blank labels.

 Refill with new roll of labels.