User's Manual

Tally Dascom DL-210 User Guide V1.3

② Hold down Feed Key and switch on printer simultaneously. Release Feed Key once powering

on, the printer will beep once.

③ Status LED on, printer enter upgrade mode.

(4) Upgrade Firmware

① Run Dascom setup tool, select model Label Printer and USB interface.

② Select “Update Firmware” tab, then click “Browse” to locate the firmware/CG file, and then

click “Update”. May take about 20 seconds.

③ After loading the firmware, the Power LED, Error LED and Status LED blink.

④ When the printer beeps twice, and the three LEDs are on, turn the printer off.

⑤ Mission complete.