User's Guide
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 SOFTWARE SETUP
- 4 SETTING/CHECKING MODES
- 5 TROUBLESHOOTING
- 6 COMMUNICATION INTERFACES SPECIFICATIONS
- 7 PRINTING CONTROL COMMAND SETS
- APPENDIX I Wi-Fi CONNECTION (OPTION)
- APPENDIX II FCC STATEMENT
- APPENDIX III DASCOM EPRESENTATIVES
Tally Dascom DT-330 User Guide V1.0
11
1.8.1 Power Switch
Turn the printer on or off. The marks on the switch: (O: OFF / | : ON)
Before turning on the printer, be sure to check that the AC adapter is connected
to the power supply.
1.8.2 Control Panel
LED
Power LED
Lights when the power supply is on.
Goes out when the power supply is turned off.
Paper LED
Lights or Flashes when there is no more roll paper or there is little remaining.
Off when there is a sufficient amount of roll paper remaining.
Error LED
Lights or Flashes when an error occurs. Please power off the printer and refer to Chapter 5.1 “Error
Status”.
Feed Key
Pressing this key once feeds the roll paper by one line. Holding this button down feeds the roll
paper continuously.
POWER LED
PAPER LED
ERROR LED
FEED key