User's Guide

Tally Dascom DT-330 User Guide V1.0
15
2.3 Attaching Power
Checking the voltage of the power adapter
Before you connect the power adapter to the power socket, check if the
voltage is correct. If you connect the power adapter to power with incorrect
voltage this may result in electrical damage to adapter and printer.
1. Make sure the printer and the computer are powered off.
2. Connect the power cord to the power adapter.
3. Connect the power adapter to the power socket at the rear of the printer.
4. Ensure the power cord is securely connected. Connect the power cord plug to a main socket.
1) Please use the recommended power adapter or equivalent products.
2) When disconnecting the AC adapter plug, hand-held plug connector
housing, to avoid the pulling on the cable with force.
3) Avoid pulling the power adapter cable, otherwise it will damage the
cables, causing fire and shock.
4) Avoid placing the power adapter around a heating device, otherwise the
cable may melt, causing fire and shock.
5)
If you do not use the printer over a long time, disconnect the power
supply of the printer power adapter.