User's Guide
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 SOFTWARE SETUP
- 4 SETTING/CHECKING MODES
- 5 TROUBLESHOOTING
- 6 COMMUNICATION INTERFACES SPECIFICATIONS
- 7 PRINTING CONTROL COMMAND SETS
- APPENDIX I Wi-Fi CONNECTION (OPTION)
- APPENDIX II FCC STATEMENT
- APPENDIX III DASCOM EPRESENTATIVES
Tally Dascom DT-330 User Guide V1.0
23
2.6.4 Connecting Serial Interface (Option)
1.
Insert the interface cable connector firmly into the interface connector on the connector
panel.
2. When using the connectors equipped with screws, tighten them to secure the connectors
firmly.
3. Connect the other end of the interface cable to the host computer.
2.6.5 Connecting Parallel Interface (Option)
1.
Insert the interface cable connector firmly into the interface connector on the connector
panel.
2. Press down the clips on either side of the connector to lock it in place.
3.
Connect the other end of the interface cable to the host computer.