User's Guide
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 SOFTWARE SETUP
- 4 SETTING/CHECKING MODES
- 5 TROUBLESHOOTING
- 6 COMMUNICATION INTERFACES SPECIFICATIONS
- 7 PRINTING CONTROL COMMAND SETS
- APPENDIX I Wi-Fi CONNECTION (OPTION)
- APPENDIX II FCC STATEMENT
- APPENDIX III DASCOM EPRESENTATIVES
Tally Dascom DT-330 User Guide V1.0
33
System Setup
Device Configuration
（ 5 ） Save the parameters and click “←” at the upper right corner to return to the menu. Click
“Disconnect”, the printer will restart to execute the new parameters.
Parameter
Default
Selectable parameters and Annotation
Energy Saving
10min
Select the time before entering energy-saving
mode without any data communication and button
action, or directly cancel the energy-saving mode.
◆ Off ◆ 1 min ◆ 2 min ◆ 5 min ◆ 10 min
Darkness
2
Selectable range is 1~4.
Print Mode
Quality
Priority
◆ Quality Priority：The print quality is best, while
the print speed will be lowered.
◆ Speed Priority：The print speed is fastest, while
the print quality will be decreased.
Emulation
ESC/POS
◆ ESC/POS
Left Margin
0.0mm
Selectable range is 0 ~ 80mm.
Parameter
Default
Selectable parameters and Annotation
Black mark Option
Disable
◆Disable ◆Enable
BM To First Line Offset
-4.0mm
Selectable range is -4 ~ 50mm.
BM To Tear Offset
90.0mm
Selectable range is -18 ~ 150mm.
Cutter Option
Partial Cut
◆Disable ◆Full Cut ◆ Partial Cut