User's Manual

Tally Dascom 1125

Online State

Function Name

Switch

Operation

LED Function Description

Tear Off {S1} L1, L2 flash

This is valid for tractor mode only. It feeds the form to the

tear-off position. After tearing off the form, printing starts

on the next TOF by:

x pressing S1 once, or

x receiving print data from the host.

LF {S2}

Feeds a line with every press of S2.

FF [S2] -

By holding S2, the printer initially feeds a few lines; then

feeds the form to the next TOF for rear tractor or ejects

the form for cut sheets.

Load/Eject {S3} -

x Load: Automatically loads the paper (according to path

selection) when no paper is on the platen.

x Eject: For rear tractor, it retracts the form from the

platen to allow users to install cut sheets. (NOTE:

Users have to toggle the path selection lever.)

For cut sheets, it ejects the form on the platen.

Setup state [S4] > 3 secs L4 Toggles to Setup state. Indicated by flashing L4.

Clear Buffer [S4]+{S1} - Clears the print buffer and beeps once when completed.

Reset

[S4]+[S1] for

longer time

Initializes the printer to the factory default settings. Beeps

3 times when completed.