User's Manual

Tally Dascom 1125
35
printed above.
7. Once the setting which gives the best alignment is found, press
ɋ
OnlineɌ key to exit current level.
Printer will print “Save settings? Yes”. Press ɋLF/FFɌ key to save setting. Press ǏOnlineǐ key a few
times until the printer exits the Service Menu.
Change Pin Function
When printer has been used for a long time or the print volume is high, the frequently used print head pins
may fail. The Change Pin function enables the user to continue using the printer for a while without
compromise in print quality until a suitable print head replacement is available. This function will reduce the
print speed if activated.
Change Pin Procedure:
1. Enter the Service Menu by holding down the
ɋ
Tear/Off
Ɍ
and
ɋ
LF/FF
Ɍ
keys while powering up.
2. Load paper.
3. The printer will print as below:
Service Menu
ɋ
LF/FF
Ɍ
=OK
ɋ
Tear/Off
Ɍ
= Back
ɋ
Load/Eject
Ɍ
= Next
ɋ
Online
Ɍ
= Exit
Current Menu
φ
Vertical Alignment
Press
Ǐ
Load/Eject
ǐ
key to scroll to “Change Pin”ˈthen press
ɋ
LF/FF
Ɍ
key to select. The status
of each pin will be printed as follows:
Change Pin
1 ---------- Is this pin OK? Yes / No
2 ---------- Is this pin OK? Yes / No
3 ---------- Is this pin OK? Yes / No
:
24 ---------- Is this pin OK? Yes / No
Press
ɋ
Load/Eject
Ɍ
key to choose whether the pin is Ye s or Noˈthen press ɋLF/FFɌ key to confirm
selection.
4. When all the 24 pins are evaluated, press
ɋ
Online
Ɍ
. The printer will print “Save settings? Yes”. Press
ɋLF/FFɌ key to confirm selection. Press
Ǐ
Online
ǐ
key a few times until the printer exits the Service
Menu.