User's Manual

Tally Dascom 1125
37
Function of keys:
Ǐ
Te a r O ff
ǐ
key: Decrease 0.5mm
Ǐ
Load/Eject
ǐ
key: Increase 0.5mm
5. Press ǏLF/FFǐ key, printer will print “Save settings
˛
Ye s ”. Press ǏLoad/Ejectǐ key to choose Yes
or Noˈthen press ǏLF/FFǐ key to confirm selection and exit “Adjust Page Margins” mode by
pressing ǏOnlineǐ. The print head moves to the left side and the printer beeps twice, then the print
head moves to the middle position.
Adjust Tear-Off Position Procedure:
1. Enter the Adjust Page Margins function by holding down the
ɋ
Load/Eject
Ɍ
and
ɋ
Online
Ɍ
keys while
powering up until the printer beeps twice.
2. Load fanfold paper.
3. The printer will print as below:
Adjust Page Margins:
ɋ
LF/FF
Ɍ
=OK
ɋ
Tear/Off
Ɍ
= Back
ɋ
Load/Eject
Ɍ
= Next
ɋ
Online
Ɍ
= Exit
Current Setting: Adjust Fanfold Top Margin
4. Press
Ǐ
Load/Eject
ǐ
key until the current setting is “Adjust Tear-Off Position”. PressǏLF/FFǐkey to
confirm selection. The printer will print as follows:
Procedure
˖
Install fanfold paper to tractors
Ǐ
LF/FF
ǐ
= Add
Ǐ
Load/Eject
ǐ
= Reduce
Ǐ
Online
ǐ
= Exit
Each step is 0.5 mm
Function of keys:
Ǐ
Te a r O ff
ǐ
key: Decrease 0.5mm
Ǐ
Load/Eject
ǐ
key: Increase 0.5mm
5. Press ǏLF/FFǐ key, printer will print “Save settings
˛
Ye s ”. Press ǏLoad/Ejectǐ key to choose Yes
or Noˈthen press ǏLF/FFǐ key to confirm selection and exit “Adjust Page Margins” mode by
pressing ǏOnlineǐ. The print head moves to the left side and the printer beeps twice, then the print
head moves to the middle position.