User's Manual

Tally Dascom 1225
34
Vertical Alignment
The vertical alignment function is used to resolve any vertical line misalignments in bi-directional printing.
Adjust Vertical Alignment Procedure:
1. Enter the Service Menu by holding down the
ɋ
Tear/Off
Ɍ
and
ɋ
LF/FF
Ɍ
keys while powering up.
2. Load paper.
3. The printer will print as follows:
Service Menu
ɋ
LF/FF
Ɍ
= OK
ɋ
Tear/Off
Ɍ
= Back
ɋ
Load/Eject
Ɍ
= Next
ɋ
Online
Ɍ
= Exit
Current Setting
φ
Vertical Alignment
4. Press
ɋ
LF/FF
Ɍ
key to select the current setting. The printer will print as follows:
Vertical Alignment
ɋ
LF/FF
Ɍ
= OK
ɋ
Tear/Off
Ɍ
= Back
ɋ
Load/Eject
Ɍ
= Next
ɋ
Online
Ɍ
= Exit
Please select Paper Type
φ
Single Ply
For single ply paper, press
ɋ
LF/FF
Ɍ
key to select. For multipart paper, press
ɋ
Load/Eject
Ɍ
key to go
to “Multipart”ˈthen press
ɋ
LF/FF
Ɍ
key to select.
5. If single ply is selected for paper type, the following will print:
Single Ply
Current Print Mode: LQ
Press
ɋ
Load/Eject
Ɍ
key to scroll to other print modes if required.
6. If LQ is selected, the following will print:
LQ
ɋ
LF/FF
Ɍ
= lower ½ to left
ɋ
Load/Eject
Ɍ
= lower ½ to right
ɋ
Online
Ɍ
= Exit
LQ -2:
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pressing
Ǐ
LF/FF
ǐ
or
Ǐ
Load/Eject
ǐ
key will allow you to adjust the alignment of the vertical lines