User's Manual

Tally Dascom 1430

Offline State

Function Name

Switch

Operation

LED Function Description

Slip {S4} L4

 Press and hold this key until printer beeps twice to activate

the Slip profile mode. L4 will turn on.

 Press and hold this key until printer beeps twice to exit the

Slip profile mode. L4 will turn off.

Exit Dir {S3} L3 This is valid for single sheet mode only. It controls the exit

direction of the friction sheet paper.

Load/Eject {S2} -

 Load: Automatically loads the paper (according to path

selection) when no paper is on the platen.

 Eject: For rear tractor, it retracts the form from the platen to

allow users to install cut sheets. (NOTE: Users have to

toggle the path selection lever.)

For cut sheets, it ejects the form on the platen.

Online {S1} L2 Toggles between Online and Offline states

Micro Forward [S1]+ {S2} - While holding down S1, press S2 to micro feed paper up.

Micro Reverse [S1] +{S3} - While holding down S1, press S3 to micro feed paper down.

Clear Buffer and

Reset

{S4}+[S1] -

 Clears the print buffer. Beeps once upon completion.

 Pressing S4 longer initializes the printer to default settings.

Beeps 3 times upon completion.