User's Manual

Tally Dascom 1430

Slip Setup

Slip media refers customized forms specific to each application. Each slip may have its own unique top margin

or left margin. This is called the slip profile. The Slip setting provides a convenient way to set the printer top

and left margin settings to the slip profile at the press of a panel key without the need to manually change the

top and left margins, whenever you want to do your slip printing. Likewise, should you decide to print on

standard paper forms, you can exit from the slip profile easily at the press of a panel key.

To configure the slip top and left margin parameters, please do the followings:

1. Power up printer while pressing 【LF / FF】 key until the print head starts moving, then let go.

2. Load paper. The printer prints the few lines below.

Slip Setup

【LF / FF】 = OK 【Te a r O f f 】 = Back 【Load / Eject】 = Next 【Online】 = Exit

Current Setting: Fanfold Top Margin

3. Press the 【Load / Eject】 key to scroll to the item you want to change. The available items are Fanfold Top

Margin, Fanfold Left Margin, Single Top Margin and Single Left Margin. To select the item, press 【LF / FF】

key. In the above example, the printer will print out:

Fanfold Top Margin

【LF / FF】 Press: PrevSetup

Fanfold Top Margin 0mm

4. Press the 【Load / Eject】 key to increase by 1 mm, or press the 【Tear Off】 key to reduce 1 mm. The

range is 0~65 mm.

5. Press the 【LF / FF】 key to confirm the current selection. To save selection into memory, press the 【LF

/ FF】 key. If you do not want to save, use the 【Load / Eject】 key to scroll to “No” before pressing the

【LF / FF】 key to confirm.

6. Press the 【Online】 key to exit from Slip Setup.