User's Manual
Table Of Contents
- About This Manual
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 INSTALLING DRIVER
- 3 CONNECTING TO COMPUTER
- 4 SETTING/CHECKING MODES
- 5 SETTING DIP SWITCHES
- 6 TROUBLESHOOTING
- 7 SPECIFICATIONS
- 8 CHARACTER CODE PAGES
- 8.1 Common to All Pages (International Character Set: USA)
- 8.2 International Character Sets
- 8.3 [User-defined page]
- 8.4 [PC437: USA, Standard Europe]
- 8.5 [PC850: Multilingual]
- 8.6 [PC852: Latin2]
- 8.7 [PC858: Euro]
- 8.8 [PC860: Portuguese]
- 8.9 [PC863: Canadian-French]
- 8.10 [PC865: Nordic]
- 8.11 [PC866: Cyrillic #2]
- 8.12 [KU42: Thai]
- 8.13 [TIS11: Thai]
- 8.14 [TIS18: Thai]
- 8.15 [PC720: Arabic]
- 8.16 [PC864: Arabic]
- 8.17 [WPC1256: Arabic]
- 9 PRINTING CONTROL COMMAND SETS
Tally Dascom DT-210/230 User Guide V1.3
62
7.5 Paper Specification
7.5.1 Printable Area
80 mm paper width printing
The printable area of a paper with width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"}
(576 dots) and the space on the right and left sides are approximately 3.7 ± 2 mm {0.15 ± 0.079"}.
79.5 ± 0.5 mm {3.13 ± 0.02"}
0.141 ± 0.05 mm {0.056 ± 0.002"}
72.2 ± 0.2 mm {2.84 ± 0.008"}
3.7 mm {0.15} 3.7 mm {0.15}
All the numeric values are typical.
Paper type Specified thermal paper
Form
Roll paper
Size
Roll paper diameter 83 mm {3.27"} maximum
Min. core diameter 13mm
Take-up roll paper
width
80 + 0.5/-1.0 mm
Paper width 79.5 ± 0.5 mm
CAUTION
• Paper must not be pasted to the roll paper spool.
• The remaining amount of the roll paper when a roll
paper near-end is detected differs depending on the spool
type.