Tally Dascom 2600/2610/PRN-7 6.3.5 Printer Configuration Selecting this option allows you to configure specific parameters in the printer. When one of these menu options is selected, a new page will load showing the options which can be viewed or modified.
Tally Dascom 2600/2610/PRN-7 Example 1 Changing the dropdown menu option. In this example, we are modifying the selected font to a different font. Select “Font”. A new page appears. Select the Font dropdown menu and choose the new font. Select “Send”. 1) Changes are not applied until “Send” is selected. 2) To reset the changed value to the prior value, select “Refresh” instead of “Send”. 3) To return to the prior page without applying the change, select “Back”.
Tally Dascom 2600/2610/PRN-7 Example 2 Changing an entered value menu option. In this example, we are modifying the selected form length to a different form length. Select “Forms”. A new page appears: Select the Form Length field by highlighting the contents of the box and enter the new form length. The acceptable parameters are listed to the right of the field. Select “Send”. 1) Changes are not applied until “Send” is selected.
Tally Dascom 2600/2610/PRN-7 6.3.6 Printer Actions Selecting the Printer Actions link will produce a page with a list of actions that can be performed on the printer.
Tally Dascom 2600/2610/PRN-7 6.3.7 Load Configuration Loads the settings stored in a menu into the printer as the current settings. When the Load Configuration link is selected, the following page will be displayed: Select a menu and confirm your selection by selecting the Send button.
Tally Dascom 2600/2610/PRN-7 6.3.8 Save Configuration You can save selected printer settings in up to 5 independent menus. When the Save Configuration link is selected, the following page will be displayed: Select a menu. Select send. 6.3.9 Retrieve Configuration From Printer Selecting this option will save all the printer settings of all menus in a file. Uploading this file to other printers will clone the printer menu settings to the other printer.
Tally Dascom 2600/2610/PRN-7 6.3.10 Send Configuration to Printer Selecting this option will upload a Configuration File of another printer (see “Retrieve Configuration From Printer”). The complete configuration of this source printer will be transferred to your printer. To upload the configuration file, first click “Send Configuration To Printer”.
Tally Dascom 2600/2610/PRN-7 Use the “Browse” button to find the file to upload. Once the file is selected, click on the “Send” button. It is important to note the warning on this page. There is some delay while the file is transmitted so it is important not to resend or click on the “Send” button until the process is complete.
Tally Dascom 2600/2610/PRN-7 6.3.11 Report Selecting the report link will open up a separate browser window and a report of the printer settings will appear. This functionality is the same as pressing the “Print” option on the control panel of the printer. 6.3.12 Reset Printer This link does a hard reset of the printer, similar to cycling power. There is no user feedback as to success since the printer is rebooting.
Tally Dascom 2600/2610/PRN-7 After following the directions on this page, select the “Continue“ link and the following page is displayed: Using the “Browse” button, find the firmware file to download. Once the file is selected, click on the “Send” button. It is important to note the warning on this page. There will be some delay while the file is transmitted so it is important NOT to resend or click on the “Send” button until the process is complete.
Tally Dascom 2600/2610/PRN-7 If the process is successful, the printer will reboot and the following page will be displayed: Since the printer will reboot with successful completion of this action, the user will have to reconnect to the printer through the browser.
Tally Dascom 2600/2610/PRN-7 6.3.15 TallyCom Status Selecting this link will replace the information in the Printer Status area with networking information on the printer. The Name, Contact and Location information is set up from the General link within the Advanced Configuration page.
Tally Dascom 2600/2610/PRN-7 6.3.16 Advanced Configuration The Advanced Configuration page allows the user to set up and modify network connectivity information as well as setting up the password, email notification and logical printers. From this page it is also possible to Logout of TallyCom and restart TallyCom.
Tally Dascom 2600/2610/PRN-7 6.3.17 General The General page sets up the timers and the labels for name, contact and location of the printer. The Print Server Name is by default and can be changed accordingly. This name used for entering into Name Server (DNS/DHCP).
Tally Dascom 2600/2610/PRN-7 6.3.18 TCP/IP The TCP/IP Page allows the user to modify the existing TCP/IP information for the printer. After changing the particular parameters, it is necessary to restart TallyCom from the Advanced Configuration page. If the IP Address is changed and the Send button selected you will disconnect from the current session and will need to reconnect at the new IP Address.
Tally Dascom 2600/2610/PRN-7 6.3.19 SNMP The SNMP page allows the user to set the Community Name and the Access.
Tally Dascom 2600/2610/PRN-7 6.3.20 Password The Password page allows the user to set a password which would limit access to certain configuration and action links in WebPanel. The maximum number of characters for the password is 7. The default password is no password at all (“null“). However, “adm” is also acceptable as the default password to be compatible with the external TallyCom ċ pocket NICs (Options), which use this as the default password.
Tally Dascom 2600/2610/PRN-7 6.3.23 Email Notification With the email notification link the user will be able to set up and receive email notices for error and status conditions of the printer. Up to 4 email addresses can be set. The page looks like this: The user must set up the SMTP Mail Server as well as one or more users. The Reply address can be left as is unless there is reason to have to mail to the Reply address. To activate the mail notification: Select which notifications are to be sent out.
Tally Dascom 2600/2610/PRN-7 The “Configure” link at the end of each line of notification options allows the user to set up the message information for the email as well as selecting other pertinent information to be added to the email. In addition, the timer can be set which determines when the email notification is sent out. The page looks like this: In this example, the Online message is set to “Printer is Online”, and information on Description, Location, and Printer Name will be added to the email.
Tally Dascom 2600/2610/PRN-7 6.3.24 Logical Printers The logical printers page will add text or commands to the beginning and ending of print jobs. This is done by pre and post strings, defined in each of the logical printers. For entering binary data in these strings, the backslash character is used followed by 2 hexadecimal digits. Examples of this are \1b for an escape character, \0a for linefeed and \\ for backslash.
Tally Dascom 2600/2610/PRN-7 When selecting one of the logical printers under the Description column, the following page is displayed: In this example if the Enable checkbox is checked, the pre-string of “Beginning to print job” followed by a CR/LF will print at the beginning of every job sent to this LPR Queue. At the end of the print job, the message “End of job” with a formfeed will print. Unchecking the Enable checkbox will not send the pre or post strings.
Tally Dascom 2600/2610/PRN-7 6.3.25 Logout of TallyCom The Logout link disconnects the browser session from the printer. Clicking on the “Home” link reestablishes the connection. 6.3.26 Restart TallyCom Selecting this link will reboot the printer and disconnect the current printer connection. It is used to reset certain TCP/IP variables that were set in the General and TCP/IP pages. Once TallyCom has restarted, those new setting will take effect.
Tally Dascom 2600/2610/PRN-7 6.3.27 Virtual Control Panel The Virtual Control Panel link is in the Printer Status area of the web page. This control panel is a visual representation of the actual control panel on the printer. It allows the user to remotely read and set panel information as if they were standing at the control panel. The functionality of the virtual panel is identical to the physical LCD panel.
Tally Dascom 2600/2610/PRN-7 7 Addendum 7.
Tally Dascom 2600/2610/PRN-7 IBM character set 1 IBM character set 2 79
Tally Dascom 2600/2610/PRN-7 OCR-A character set 1 OCR-A character set 2 80
Tally Dascom 2600/2610/PRN-7 OCR-B character set 1 OCR-B character set 2 81
Tally Dascom 2600/2610/PRN-7 International Character Set Commands Country Basic Command USA FRANCE GERMANY UK DENMARK 1 SWEDEN ITALY SPAIN 1 JAPAN NORWAY DENMARK 2 SPAIN 2 LATINAMERICA DENMARK/NORWAY CHINA ˘ESC˚“R”CHRˀ˄0˅ ˘ESC˚“R”CHRˀ˄1˅ ˘ESC˚“R”CHRˀ˄2˅ ˘ESC˚“R”CHRˀ˄3˅ ˘ESC˚“R”CHRˀ˄4˅ ˘ESC˚“R”CHRˀ˄5˅ ˘ESC˚“R”CHRˀ˄6˅ ˘ESC˚“R”CHRˀ˄7˅ ˘ESC˚“R”CHRˀ˄8˅ ˘ESC˚“R”CHRˀ˄9˅ ˘ESC˚“R”CHRˀ˄10˅ ˘ESC˚“R”CHRˀ˄11˅ ˘ESC˚“R”CHRˀ˄12˅ ˘ESC˚“R”CHRˀ˄13˅ ˘ESC˚“R”CHRˀ˄16˅ International character sets˖ 82
Tally Dascom 2600/2610/PRN-7 7.2 Control Codes Summary The following table shows sequences marked by a ĸ if they are available in the various emulations. The MTPL sequences can be used within all emulation modes. The corresponding sequences are marked by a *. If you want to learn more about control codes, we recommendto download the Programmer’s Application Manual from our internet support pages.
Tally Dascom 2600/2610/PRN-7 IBM XL24 IBM AGM Ĝ Ĝ * * * * * Ĝ * * MTPL Epson Epson LQ-2550 LQ-2170 Code Function * (.
Tally Dascom 2600/2610/PRN-7 MTPL IBM XL24 IBM AGM Ĝ Ĝ Ĝ * Ĝ Epson Epson LQ-2550 LQ-2170 Ĝ Ĝ * Ĝ Ĝ Ĝ * * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ * * Function *<4> Set graphics print to 80 dpi *<40> Set graphics print to 360 dpi Ĝ Ĝ Code Ĝ Ĝ Ĝ *MI>F Assign character set G2 - Underlining ON/OFF / Select vertical tab channels .
Tally Dascom 2600/2610/PRN-7 MTPL Ĝ Ĝ IBM XL24 IBM AGM * * * * * * Ĝ Ĝ Epson Epson LQ-2550 LQ-2170 Code Function * [?7l Line overrun = Truncating data outside of the printing area * [?~ Change emulation [@ ... Set double height [\ ...
Tally Dascom 2600/2610/PRN-7 IBM XL24 IBM AGM Ĝ Ĝ * * * * * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ * Ĝ Ĝ Ĝ Ĝ MTPL Epson Epson LQ-2550 LQ-2170 Code Function * [16m Font 6 Default: Script LQ * * [17m Font 7 Default: Prestige LQ * * * [18m Font 8 Default: OCR-B LQ * * * * [19m Font 9 Default: OCR-A LQ * * * * [1 g Clear vertical tab at current position * * * * [ 1 SP k Printout in Royal Mail customer barcode * *
Tally Dascom 2600/2610/PRN-7 IBM XL24 IBM AGM Ĝ Ĝ * * * * * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ * MTPL Epson Epson LQ-2550 LQ-2170 Code Function * [4m Underline ON * * [4 SP L Set vertical spacing to 8 lpi * * * [4w Set 10 cpi * * * * [4y Selecting NLQ printing quality at 10 cpi * * * * [4z Line density 8 lpi (= line spacing 1/8 inch) * * * * [5{ Select fanfold paper mode tractor 1 * * * * [6{ Select f
Tally Dascom 2600/2610/PRN-7 MTPL IBM XL24 IBM AGM Epson Epson LQ-2550 LQ-2170 Code Function [g <2> Set graphics print to 120 dpi Ĝ Ĝ [g <3> Set graphics print to 240 dpi [g <8> Set graphics print to 60 dpi Ĝ Ĝ [g <9> Set graphics print to 120 dpi Ĝ Ĝ [j Position paper back 1/180" Ĝ Ĝ Ĝ Ĝ * * * * [ f Set absolute horizontal and vertical position * * * * [+w Interface holding time n = 1 - 30 s * * *
Tally Dascom 2600/2610/PRN-7 MTPL Ĝ IBM XL24 IBM AGM * * Epson Epson LQ-2550 LQ-2170 * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ * Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Function [ v Set vertical tab [\ Perform relative horizontal step \; Transparent mode for the characters following ^ Transparent mode for the character following _ Overline ON/OFF 0 Set line feed
Tally Dascom 2600/2610/PRN-7 MTPL IBM XL24 Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ IBM AGM Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Epson Epson LQ-2550 LQ-2170 Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Ĝ Function Double-wide printing ON Set character spacing t Select character set T Superscript or subscript OFF U Unidirectional print ON/OFF Un Unidirectional print ON/OFF W Continuous double width ON/OFF w Double height prin
Tally Dascom 2600/2610/PRN-7 7.2.1 PJL commands These PJL commands can be used with internal Ethernet interface as well as with external TallyCom III Pocket interface. This functionality may be activated via the parameter Jobcntl in the Advanced Menu.
Tally Dascom 2600/2610/PRN-7 7.2.
Tally Dascom 2600/2610/PRN-7 HEX 1B 5B 31 20 70 31 32 33 34 35 0D The numbers 1 to 5 are printed as Postnet stripes. 7.2.5 Royal Mail Customer barcode The Royal Mail Customer barcode is a special Mail type barcode. It is printed in character size. Numeric values from 0 to 9 and alpha- numeric values from A to Z are printable. After activating this barcode type, numeric characters from 0 (hex.30) to 9 (hex. 39) and alphanumeric values from A (hex. 41) to Z (hex.
Tally Dascom 2600/2610/PRN-7 Example: ASCII HEX ESC 1B [ 5B 9 39 SP 02 K 6B 7.2.8 LC printing Certain professional applications may require unusually Large character sizes. Therefore your printer has the possibility of scaling standard size characters up to factor 99 by means of control sequences (LCP*). The Header sequence defines the parameters (e.g. height) once. This definition remains until the printer is switched off.
Tally Dascom 2600/2610/PRN-7 7.2.9 List of additional control Codes You can use both the ESC sequences and the control codes Sequences [?10~ Control codes Function Barcode Off — [?11~ — Barcode On PSC 0 \ — Unsecured mode PSC 1 \ — Secured mode PLS \ — [s — LCP character set Sends a character as ASCII character; n > 0–255 decimal [20s Barcode bracket [16s Start code LCP Header [25s
Tally Dascom 2600/2610/PRN-7 7.3 Interfaces Specifications Your matrix printer offers connectivity via a parallel interface, USB and Ethernet interface. Serial I/O RS232C interface is an option. This appendix informs you about the parallel Interface, USB, Ethernet interface and optional serial interface RS232C, and describes the communication between your computer and the printer. These interfaces are linked to form a called shared interface.
Tally Dascom 2600/2610/PRN-7 7.3.1 Parallel I/O IEEE 1284 The bidirectional parallel interface offers the “nibble” mode of IEEE1284 interface. This enables installation in accordance with Windows “Plug & Play”. The standard parallel interface is able to transfer data at a speed of max. 30, 000 bytes per second. When the receiving buffer is full, the data input is blocked until the data buffer is empty. Connector assignment Connector no.
Tally Dascom 2600/2610/PRN-7 7.3.2 Ethernet I/O 10/100 Mulitprotocol The Ethernet interface enables the printer to connect to local area networks. Its attributes are: Hardware Supported operating Systems Supported Protocols Designation of IP Address Configuration Status Management Setup LAN/Ethernet: RJ45, Ethernet 100BaseTX with 100 Mbps (IEEE802.3u), 10Base-T with 10 Mbps (IEEE802.
Tally Dascom 2600/2610/PRN-7 Example of a Printer connected to a computer in an Network 䕺 The assumed address space corresponds to the TCP/IP address, class C, 192.168.1.xxx. 䕺 The subnet mask to be used is 255.255.255.0. 䕺 The address of the router, or gateway, is 0.0.0.0, if not available. Example of several devices in an Ethernet 7.3.3 USB 2.0 I/O – Full Speed The USB interface conforms to the Universal Serial Bus 2.0 Specifications. It supports the Full Speed mode at 12 Mbps.
Tally Dascom 2600/2610/PRN-7 7.3.4 Optional Serial Interface RS232C Your printer’s serial interface supports the RS232C specification. The signals are received and transmitted by a 9 pin connector. Basically 3 lines are enough for exchanging information between computer and printer (one receive line, one send line, one line for common grounding). Type Synchronization Transmission rate Signal status RS232C interface Asynchronous 600 Baud to 19200 Baud OFF (log.1) -3 V to -15 V ON (log.
Tally Dascom 2600/2610/PRN-7 1) The serial cable length must not exceed 15 meters. 2) Make sure the “Interface Setup” selects serial interface and the settings are the same as PC communication port settings.
Tally Dascom 2600/2610/PRN-7 Interface cable (serial interface) The cables used must be shielded. The cable shield must be connected to the connector shield on both ends. PC/AT˄9 Pin˅ RxD 2 TxD 3 CTS 8 SG 5 DSR 6 DTR 4 Printer˄9 Pin˅ 3 TxD 2 RxD 4 DTR/RDY 5 SG PC/AT˄25 Pin˅ Printer˄9 Pin˅ FG TxD RxD CTS SG DSR DTR 1 2 3 5 7 6 20 2 3 4 5 FG RxD TxD DTR/RDY SG It depends on the menu setting whether DTR or RDY (Ready) is active at Pin 4.
Tally Dascom 2600/2610/PRN-7 Protocols 䕺 Memory mode XON/XOFF The received characters are stored in a FIFO buffer (first in/first out). The characters are processed in this buffer. The buffer capacity can be adjusted from 0 to 128 Kb. If the buffer is full, the interface signals NOT READY (signal acknowledgement: Level 1, -12 V) and XOFF (hex. 13, dec. 19). This results in stopping the data transmission. When the FIFO buffer is empty again, the interface signals READY (level 0, +12 V) and XON (hex.11, dec.
Tally Dascom 2600/2610/PRN-7 䕺 ENQ/STX protocol In addition to this XON/XOFF message, the possibility exists of requesting a status byte from the printer using the ENQ code (hex. 05, dec. 5). The STX code (hex 02, dec. 2) is used to clear any error messages (parity error, buffer overflow). Status byte Bit 0-1 Bit 1-1 Bit 2-0 Bit 3-1 Bit 4-1 Bit 5-1 Bit 6-1 Bit 7-0 BUSY Off Line Paper end Always 1 Cover open Buffer overflow Parity or frame error Always 0 STX (hex02): ENQ (hex05): XON/XOF: HandThr.
Tally Dascom 2600/2610/PRN-7 8 Options and accessories The following options can be ordered for your printer. 8.1 Options Tractor Unit 2600 Name Part no. Second Tractor for push and pull position (rear, top and front installable). 99992 Tractor Unit 2610 Name Part no. Second Tractor for push and pull position (rear, top and front installable). 99993 Serial Interface 2600/2610 Name Part no.
Tally Dascom 2600/2610/PRN-7 8.2 Consumables Ribbons Name Part no. Ribbon cassette monochrome black for narrow model 99061 Ribbon cassette monochrome black for wide d l Refill Kits 99071 Name Refill Kit monochrome black fabric for narrow d l d d Refill Kit monochrome black fabric for wide model, on demand 8.3 Part no. 99002 99072 Accessories Programming manuals The following programming manuals are available. You can download the manuals from our internet page. Part no.
Tally Dascom 2600/2610/PRN-7 9 9.1 General Specifications Printer Specifications Print System Mono-chrome serial impact dot matrix Print Technology Uni-/bi-directional logic seeking for text and graphics Print Head Number of pins: 24 pins (2 x 12; staggered) Firing frequency: Normal mode: 2 kHz Pin diameter: 0.
Tally Dascom 2600/2610/PRN-7 Tab Speed Graphic Densities 50 ips Horizontal: 60 / 72 / 80 / 90 / 120 / 180 / 240 / 360 DPI (dot per inch) Vertical: 90 / 180 / 360 DPI Narrow version Print width Wide version 10 CPI: 80 CPL 136 CPL (characters per line) 12 CPI: 96 CPL 163 CPL 15 CPI: 120 CPL 204 CPL 17.
Tally Dascom 2600/2610/PRN-7 Paper Handling Feeding method: Friction (Single) and Tractor (FF-front / FF-rear / FF-pull) Path selection: By selection lever located at the right device side Paper path: Cut sheets: Front in, front or top out Fanfold paper: Front or rear in, top out For details enter the Paper Specifications – 9.
Tally Dascom 2600/2610/PRN-7 Power Supply Unit type: Autosensing wide range power supply Power cord: Detachable Voltage rating: AC 100 to 240V / 47Hz to 63Hz Nominal power: ESD: 30W Comply with IEC801-2; Contact discharge: 4kV Air discharge: Fuse T6.3AH/250V MTTR < 15 minutes Continuous operation Certifications 8kV Throughput: 132) 422 p/h in Draft mode according IEC 10561:1999 (ECMA MTBF: 20.
Tally Dascom 2600/2610/PRN-7 Draft Roman Sans Serif Courier (incl.
Souvenir Gothic Orator Script Prestige OCR-A Courier (incl.
Tally Dascom 2600/2610/PRN-7 9.3 Paper Specifications 9.3.
Tally Dascom 2600/2610/PRN-7 9.3.
Tally Dascom 2600/2610/PRN-7 10 Maintenance Your printer requires very little care. Occasional cleaning and replacement of the ribbon cartridge are all that is required. Cleaning is recommended approximately every 6 months or 300 hours of operation, whichever is sooner. Lubrication of the printer is not usually necessary. If the print head carriage does not move smoothly back and forth, clean the printer in the manner described in this chapter. If the problem continues, contact your dealer.
Tally Dascom 2600/2610/PRN-7 10.2 Troubleshooting Your printer is extremely reliable, but occasionally problems may occur. This chapter provides information on some of the common problems you may encounter and how you may solve them. If you encounter problems that you cannot resolve, contact your dealer or service partner for assistance. 10.2.1 Print Quality Problems and Solutions Problem Printing is too light or too dark. Smears and stains appear on the page.
Tally Dascom 2600/2610/PRN-7 10.2.2 Paper Handling Problems and Solutions Problem Paper cannot be loaded or fed. Paper jams while loading. Paper jams while printing. Paper slips off the forms tractors or the perforated holes of the paper tear during printing. 10.2.3 Solution t .BLF TVSF UIBU UIF QBQFS TFMFDU MFWFS MPDBUFE PO the top right of the printer is set correctly. t 5VSO PGG UIF QSJOUFS BOE SFNPWF UIF KBNNFE paper. Remove any obstructions from the paper path. t .
Tally Dascom 2600/2610/PRN-7 the printer. Paper select lever error t If paper is loaded and the paper select lever is moved to the incorrect position, the printer turns offline, and the buzzer sounds continuously. Switch the paper select lever back to its correct position.
Tally Dascom 2600/2610/PRN-7 FCC STATEMENT MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable against harmful interference in a residential installation.
Tally Dascom 2600/2610/PRN-7 DASCOM REPRESENTATIVES GERMANY DASCOM Europe GmbH Heuweg 3 D-89079 Ulm Deutschland Tel.: +49 (0) 731 2075 0 Fax: +49 (0) 731 2075 100 www.dascom.com UNITED KINGDOM DASCOM GB Ltd Hart House,Priestley Road, Basingstoke, Hampshire RG24 9PU, England Phone: +44 (0) 1256 481481 Fax: +44 (0) 1256 481400 www.dascom.com SINGAPORE (ASIA PACIFIC) DASCOM AP Pte Ltd 21 Bukit Batok Crescent #29-81,WCEGA Tower Singapore 658065 Phone: +65 6760 8833 Fax: +65 6760 1066 www.dascom.
