Use and Care Guide
Table Of Contents
- WHAT IS COVERED
- Table of Contents
- Safety Information
- Warranty
- Pre-Installation
- Pre-Installation (continued)
- Junction Box Installation
- Junction Box Installation (continued)
- Keyhole Installation
- Keyhole Installation (continued)
- Keyhole Installation (continued)
- Battery Replacement and Specifications
- Lighting Control Switch
- Test Switch
- Care and Cleaning
- Troubleshooting
11 HOMEDEPOT.com
Please contact 1-877-527-0313 for further assistance.
Test Switch
To test the battery, press and hold the test switch button.
Afterapproximately 3 seconds, the xture will transition
to backup battery operation and dim to 25%. Release the
buttonto resume normal AC function.
Care and Cleaning
CAUTION: Before attempting to clean the xture, disconnect
the power to the xture by turning the breaker off or removing
the fuse from the fuse box.
□ Clean the xture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light xture.
Troubleshooting
WARNING: Before doing any work on the xture, disconnect
power to the light xture.
Problem Probable Cause Solution
The xture will not light. The power is off. Ensure the power supply is on.
The circuit breaker is off. Ensure the circuit breaker is in the on
position.
There is a bad connection. Check to ensure proper wire connections
are made. Contact a qualied electrician.
There is a defective switch. Contact a qualied electrician.
The fuse blows or the circuit
breaker trips when the light is
turned on.
The wires are crossed or the power
wire is grounding out.
Check the wire connections.
Contact a qualied electrician or call
Commercial Electric customer service
1-877-527-0313.
Test switch