e element Digital LED TV Please reform to the actual product INSTRUCTION MANUAL Please read all the instructions carefully before using this TV, and keep the manual for future reference.
f CONTENTS Important Safety Instructions Additional Safely Information Preparations What's Included Front View Rear View Wall Mounting Remote Control Connecting External Devices TV SETUP Turning On/Off Your TV Initial Setup Source Channel Selection Volume Adjustment and Mute Setup Current Channel Information Picture Sound Function Time Option Lock Channel Network Setting Internationalist Operation Parental Control Troubleshooting FCC Notes OTT APP Service Sao ~as 3
§ IMPORTANT SAFETY INSTRUCTIONS Read these Instructions — All the safety and operating instructions should be read before this product is operated. Neap theses Instructions — The safety and operating instructions should be retained for future reference. Heed all warnings — All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions — All operating and use instructions should be followed.
§ ADDITIONAL SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safely information below. Electrical Safety . sos oe The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components.
f PREPARATIONS TV Set Remote Control with Batteries @ mantilla Biggest LED TY [Ata User Manual Quick Start Guide
{ PREPARATIONS « STANDBY Switch the TV between On / Standby mode. + SOURCE Press to select among different input signal sources. « MENU Display the OSD (on scream display) menu. » CH-f+ Press to select a channel. + YO-i+ Press to adjust the volume. » LED The LED light indicates when the TV is activated. + IR infrared Receiver.
f PREPARATIONS Remote Control 1. POWER: Tum the TV on and off. 2. Input: This button Is used to switch among different sources, Select a source and press ENTER button to confirm. 3. Digits! 3: Directly select chains! with digital buttons. 4. 3 : Switch to the previous program. 8 5. YouTube: If network connects, press this key to view You Tubs directly. 6. List: Press it fo show channel list and favorite list on screen. 7. HOME: Press App home page. 8.
{ Connecting External Devices SUCRE TAT FANATICAL R45 Jones, [3 Headphones Notwork Cable @ {not included) Approves AUDIO Blu 7 Recorder 4 ] ray Player Gama Console & ou Satellite Video Camera Arisen Cable Safaris Receiver { HDMI Device, Match colored connectors to colored pols on back side of the TV.
£ INITIAL SETUP = Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the blue LED indicator will illuminate. In Standby Mode, press the {J button on the main unit or on the remote control to tun the TV on. . ‘The POWER button on the main unit or on the remote control can only Seg RE TG Te eye i TE GRY esa ee Connect the power cord to the power socket after you have completed all the physical connections.
f INITIAL SETUP 1 input Setup Press input key on the remote control to enter "INPUT SOURCE” menu. There are these options for you to select: "TV, "AV", “Component”, "HDMI", “HDMI, "HDMI, “Uses. Use to select a input source and press ENTER key to confirm. VEAL lel hi = coo = 2 Channels Selection There are four ways fo select channel: 1) Using number keys, and ENTER keys on the remote control {o select channel directly.
fF maL SETUP 3) Pressure key to return lo previous channel, press it again to rectum to current channel. To quickly switch between two channels that are far apart, tune to one channel, then use the number keys io select the second channel. Then use the eo button to quickly alternate between them. is not activated if no channel has been changed after TV muting on. 4) Select channels from "Channels List” or "Favorite List”. Press List key fo choose from "Channel List” menu.
@ Tv SETUP 1. Press MENU key to display the main menu on the screen. 2. Press 4% key fo select “Picture” option. 3. Press br or ENTER key fo enter "Picture" sub menu. Picture Mode Your TV has four picture settings { Spores, Normal, Soft, User) that are preset at the factory. Only "User” mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness, Tint. 1. Press A/V key to select "Picture Mode” option. 2. Press bor "ENTER" key to enter sub menu. 3.
@T1V SETUP 1. Press MENU key fo display the main menu on the screen. 2. Press 4/¥ key to select “Sound” option. 3. Press » or ENTER key to enter "Sound” sub menu. Sound Mode You can select the type of the special sound effect to be used when watching a given broadcast. Your TV has five sound settings ("Standard’, “Music”, “Movie”, “Sports®, “User” that ars preset at the factory. 1. Press A/V key to select "Sound Mode" option. 2. Press "Bb" or "ENTER" key to enter sub menu. 3.
@ Tv SETUP Digital Audio Output This is used to set digital audio output. 1. Press 4/¥ key to select "Digital Audio Output” option. Press ENTER/P key to enter sub menu. 2. Press 4/¥ key to select “Auto” or “PCMCIA. Audio Languages You can set the primary and secondary language for audio. Dolby Audio Process Dolby Audio Process This is used to set Dolby Audio Process. 1. Press A/V key io select "Dolby Audio Process” option. 2. Press ENTER/» key to enter "Dolby Audio Process” sub menu.
@ TV SETUP Link Setup 1. Press A/V key to select “Link Setup” option. 2. Press ENTER or ¥ key to enter “Link Setup” sub menu. Enable Link: Press «4/8 fo turn nonfood the link setup. Auto Power On: When this option is “On” and the TV is in standby mode. To tum on the DVD can also turn the TV at the same time. Auto Standby: When this Option is “On” and the turn off TV can also um the DVD inch standby mode. HDMI DID This function is only used in HDM! mode. 1. Press key to select “HDMI EDID® option. 2.
@ TV SETUP 1. Press MENU key io display the main menu on the screen. 2. Press &/V key to select "Time" option. 3. Press ENTER/p key to enter "Tums" sub menu. Off Time In "Off Time” item, press b-button or ENTER bunion to enter the sub menu, set the day & time to tum off the TV set. On Time In "On Time" item, press #button or ENTER button to enter the sub menu, set the ime to tum on the TV set, when the TV set is in the standby mode. You can also choose which day fo control you TV set in a week.
