Reference Manual

Figure 8-3 basic settings

Open application settings to set the basic scan switch, as shown in figure 8-4:

(1) scan sound: Open the scan will sound prompt;

(2) vibration: If opened, the scanner will vibrate to prompt;

(3) Bar Code append: Open Bar Code can be continuously output;

(4) auto-erase: The last Barcode will be automatically erased when the Barcode is

scanned;

(5) BOOT AUTO-START: When the BOOT is started, the scanning program will

be opened automatically;

(6) display bar code type: when the Bar Code is scanned, the Bar Code type is

displayed;

(7) lifting stop scanning: When the scanning key is raised, the scanning light is

extinguished immediately; when the scanning key is raised, the scanning light lasts for

[ scanning duration ] and then is extinguished;

(8) circular scanning: Open, scanning will automatically continuous scanning;

(9) interval time: self-set time, scan bar code to complete the next time the Bar

Code Scan;

(10) restore the bar code default settings: You can restore the bar code default

settings, as shown in figure 8-5;