Users Manual

Table Of Contents

PAGE 1
Q106 (Tia BT) Smart Lock User Manual Please read this manual carefully before use v1.2 Usage Notice Note: Please prepare a Phillips screw driver and 4 AA batteries before Installation. 1. In default setting, It can be unlocked with original password "12345678908", any fingerprint or key. 2. There will be a low power anal when voltage below 4.8V, It can bs ably unlocked around 50 times, please replace with 4 new AA batteries In time.
PAGE 2
. Adjust the front panel and the Iron plate so that they are upright. 9. The connection wire is wound into the slot on the right. Note: If you fea] that the front lock Is not flex you can remove the front panel and the Iron plate. Around hols with a diameter made on the door body from 84 mm above the center point of the door hole, Then use the standby connection column and connection column to reinforce the fixing. perinatal The Back Pai a.