Product Diagram

正面
尺寸：80*190mm
魔声INSPIRE说明书
背面
材质：128G铜版纸
Guide to Indicator Lights
You can use your On-Ear headphone as a wired headphone to save
batteries or if your batteries are not charged.
Disconnect the Headphone
headphone, or disconnect it in the Bluetooth menu of your device.
Reconnect the Headphone
To connect the headphone to the phone or music player that you last
used with it, switch on the headphone and bluetooth of your device
to make the connection.
INDICATOR LIGHT DESCRIPTION
Red Flash Low Battery Warning
Red Flash X2 Power O
Red & Blue Alternate Flash
Blue Flash Once Every
5 seconds Quickly
Paring
Green Light ANC ON
• Connected
• Connect Successfully
• Play Music
• Active Call
• During Call
• Standby
Blue Flash X2 • Power On
• Incoming Call
Headphone Controls
Note:
A voice prompt will be heard when the battery is low.
Switch the ANC switch to activate /deactivate the noise cancellation function.
The LED indication will stay solid green when the noise cancellation is on.
To guarantee your personal safety, please ensure that these headphones are not
worn or kept in the immediate vicinity (not less than 10 cm) of a pacemaker.
Power o
Play / Pause / Answer
/Hang up phone calls
Reject phone calls
Redial
Volume + / -
Previous / Next Track
Short press the MFB Button once
Press and hold the MFB Button for 1 second
Double-click the MFB Button
Press the Volume + / - Button
Press and hold the Volume + / - Button for 1 second
Device change Press and hold the Volume +
(During the call)
Mute/unmute call Short press the Volume + /- Button
(During the call)
Press and hold the MFB Button for 3 seconds
until the red indicator ashes twice and turns o
Function
Power on
Operation
Press and hold the MFB Button for 3 seconds
until the blue indicator ashes twice
ENGLISH
Pairing
1. Ensure that your phone or music player is switched on.
2.
3.
4. Activate the Bluetooth feature on your phone or music player, and set it to search
for Bluetooth devices.
5. Select your Monster Device from the list of found devices on your phone or music
player.
1. Type-C Charging Port
2. ANC Button
3. Volume + / Next Track (long press)
4. Volume - / Previous Track (long press)
5. MFB Button(Power on/o/Play /Pause /Call/End/ Paring)
6. 3.5mm Audio Port
7. LED Indicator
8. Microphone
Product Diagram
1
2
3
4
5
6
7
8
To pair the headphone if it has been previously paired with another device, switch
on the headphone, it will enter the pairing mode automatically and the blue and
red indicator light starts to alternately ash quickly. The headphone is ready to pair
with your device.
To pair the headphone if it has not been previously paired with a device, ensure
that the headphone is switched o, and press and hold the multifunction key (for
about ve seconds) until the blue and red indicator light starts to alternately ash
quickly.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates use
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
responsible for compliance could void the user‘s authority to operate
this equipment.
• This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.