BT-ZYLY-D Bluetooth module Jiangxi Zhongyang Electrical Co. Ltd.
Version's history Date Version 2020/8/11 1.
一、 Module overview 1. Chip introduction The module uses the AC6926A chip of Zhuhai Jerry Technology Co., Ltd. as the core. It is a high-performance 32-bitRISC CPU that supports a maximum operating frequency of 160MHz. The chip integrates 128KB of SRAM, 10KB of MASKROM, and 16K 4-Way Icache. 64 interrupt sources, 4-level programmable interrupt priority; support 16 external I/O interrupts; with soft interrupt function. 1 full-speed USB 2.
PIN No. Name I/O Type Other Function 1 TXD I/O Serial port for communication with product main controller (using text protocol) 2 DACR I/O Audio output 3 RXD I/O Serial port for communication with product main controller (using text protocol) 4 DACL I/O Audio output 5 GND -- GROUND 6 SGND -- No answer 7 VCC POWER 3.3V~5.
2. Run Zwift APP： 3. Select account login： 4.
/ 13
5.
6.
7.
/ 13
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this de vice may not cause harmful interference, and (2) this device must accept any interference received, including in terference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s aut hority to operate the equipment.
This device is intended only for OEM integrators under the following conditions: 1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna, As long as the two conditions above are met, further transmitter testing will not be required.
2.6 RF exposure considerations This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 2.7 Antennas This radio transmitter 2AXTXBT-ZYLY-D has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated.
