ZYM-GM7033-MF Production Data ZYM-GM7033-MF GPS+GLONASS Mouse User’s Manual Revision History Version P0.0 Date 2021.6 Explain First Release -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data TABLE OF CONTENTS 1. Introduction…………………………………………………………4 1.1 Overview…………………………………………………………4 1.2 Features……………………………………………………………4 1.3 Technical Specification……………………………………………6 2. Operational Characteristics…………………………………………8 2.1 Initialization setup…………………………………………………8 2.2 Navigation…………………………………………………………8 3. Appendix A Software Protocol……………………………………9 A.1 NMEA transmitted message……………………………………9 4. Appendix B Coordinate System and Output Settings……………16 B.
ZYM-GM7033-MF Production Data Usage Notice Please read before you start to use the GNSS receiver: GNSS(Global Position System) is found and operated by US Department of defense. The Organization is responsible for accuracy and maintenance of the system with full authority. Any change that is made by the organization will affect accuracy and function of GNSS. For your driving security, we strongly suggest that you do not operate the device during driving.
ZYM-GM7033-MF Production Data 1. Introduction 1.1 Overview The ZYM-GM7033 Smart GNSS Receiver is a total solution GNSS receiver, designed based on MediaTek.Inc SOC MT3333AV . This positioning application meets strict needs such as car navigation, mapping, surveying,security, agriculture and so on. Only clear view of sky and certain power supply are necessary to the unit. It communicates with other electronic utilities via compatible RS232 and saves critical satellite data by built–in backup memory.
ZYM-GM7033-MF Production Data 1-5 meter position accuracy. 5. Compact design ideal for applications with minimal space. 6. A rechargeable battery sustains internal clock and memory. The battery is recharged during normal operation. 7. Built-in WAAS Demodulator. 8. Water proof IP67 design for industry standard. 9. Built-in high gain 36mm*36mm*4mm ceramic patch-antenna.
ZYM-GM7033-MF Production Data 1.3. Technical Specification 1.3.1. Outline,Pin connection Outline: (mm)。 * General tolerances = ±0.3mm 1.3.2. Hardware Interface The ZYM-GM7033 includes an antenna in a unique style waterproof gadget. Simply connector to one of the accessories linking to your main board or other devices. -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data 1.3.3. Environmental Characteristics 1)Working Temperature: -40~+85°C 2) Storage temperature: -40 ~+90°C 3) Humidity：≦95% 1.3.4. Electrical Characteristics 1) Input voltage: 5.0 +/- 10% V DC 2) Inpur current：<80mA 3) Backup battery: +3.0V DC (Inner Rechargeable Lithium battery). 1.3.5. Performance 1) Channels: 99 2) Update rate: 1 second. 3) Acquisition time (average) Hot start: <1 second(open sky). Cold start: <35 second(open sky).
ZYM-GM7033-MF Production Data 2. Operational Characteristics 2.1. Initialization Setup After the initial self-test is complete, the G-mouse will begin the process of satellite acquisition and tracking. The acquisition process is fully automatic and, under normal circumstances, will take approximately 35 seconds to achieve a position fix (15 seconds if ephemeris data is know). After a position fix has been calculated, valid position and time information will be transmitted over the output channel(s).
ZYM-GM7033-MF Production Data 3．Appendix A Software Protocol A.1 NMEA Transmitted Message NMEA is the standard of GNSS protocol. Cynosure GNSS receiver supports several NMEA sentences: GGA, GSV, GSA, RMC, VTG, ZDA, GLL and GRS. This data set includes the complete PVT (position, velocity, time) solution computed by the GNSS receiver.
ZYM-GM7033-MF Production Data GGA - Global Positioning System Fix Data -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data GSA – GNSS DOP and Active Satellites -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data GSV – GNSS Satellites in View -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data RMC – Recommended Minimum Specific GNSS Data VTG – Course Over Ground and Ground Speed -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data ZDA – Time & Date GLL - Geographic Position - Latitude/Longitude -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
ZYM-GM7033-MF Production Data 4. Appendix B Coordinate System and Output Settings B.1 Coordinate System World standard coordinate system WGS84 is builds in. B.2 Output Settings Coordinate System: WGS84. Baud rate: 9600 Output message: GGA, GSA, GSV, RMC -----------------------------------------------------------------------------------------------------------------------------------------Glead Electronics www.glead.com.cn P0.1 2021. 06.
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
