Wi-Fi IP CAMERA QUICK OPERATION GUIDE Apply for Model: BC5 /P1-4X /P14-4X/ P2R-20X Note: Due to the continuous updating of the product and software, there may be a discrepancy between the operating guide and the APP interface. All the instructions are subject to the actual operation interface.
Contents Introduction.....................................................................................................................................................- 1 Installation.....................................................................................................................................................- 2 SD Card Slot.....................................................................................................................................................
1. Introduction Thanks for buying JideTech Wi-Fi IP Camera. We provide IP cameras which has different appearance and function. We follow the people-oriented design philosophy, these four cameras will be easily able to integrate into our daily lives, both in terms of appearance and function. This manual describes all the parameters, functional structure, how to use, common problems and solutions for the camera in detail. This would help you know the camera quickly and use it easily.
2.
3.
4. APP Download Download APP “CamHipro” from Google Play or Apple Store, or scan the QR Code to install.
5. Mobile APP Connection 5.1 Connect Hot-Spot Connect power supply and use your mobile device to search the camera’s Hot-Spot and connect the Hot-Spot. As the below picture. The camera will turn into the self-test mode after connect power supply. It will take about 15 seconds. 5.2 Add Camera Add your camera to ‘CamHipro’ APP follow the steps of the below pictures.
Step 4 Step 5 Step 7 Step 6 Step 8 Step 9 5.
5.4 Connect the Camera by Scan QR Code A) Connect the camera to the power supply and the camera would turn into self-test mode, which would take about 15 seconds. Open the ‘CamHipro’ APP. B) Add the camera by Scan QR code follow the below steps. Note: Please make sure that the camera has connected to your router’s Wi-Fi.
5.5 Connect the Camera by Search Nearby Devices A） Connect the camera to the power supply and the camera would turn into self-test mode, which would take about 15 seconds. Open the ‘CamHipro’ APP. B） Add the camera by Search Nearby Devices follow the below steps. Note: 1. Please make sure that the camera has been connected to router’s Wi-Fi. 2. Please make sure that your cell phone connects the same Wi-Fi as the camera connected. 3.
5.6 APP Function Introduction 5.6.
5.6.2 Local files, device list and add other new camera Click list；click to view the local file of different cameras.；click to change the camera device to add a new camera. 5.6.
Cruise line the second cruise line the third cruise line the forth cruise line the fifth cruise line the sixth cruise line the seventh cruise line the eighth cruise line Number for setting 17-32 65-80 113-128 129-144 146-160 161-176 177-192 Number for auto cruise 42 +transfer 43 +transfer 44 +transfer 45 +transfer 46 +transfer 47 +transfer 48 +transfer 5.6.4 Change password Click “Change Password” to modify the password. Old password :01234567 5.6.
5.6.6 Motion Detection 5.6.7 Email setting 5.6.
5.6.9 Video setting and audio setting 5.6.10 SD card plan recording 5.6.
5.6.12 Device time setting 5.6.
6. Computer Browsing Access 6.1 Search IP Camera Download Software from the website ( https://JideTech-cctv.com) or Mini CD in the package, open the file and install search tool in your computer. Click “next” to find IP camera. You can select Network Card to search IP Camera. 6.2 View Video by Browser Support IE, Google and Firefox browser, install ActiveX before view video. 6.3 Interface Region A Multiple preview modes. View memory card capacity and date.
Local manual recording. Video Recording playback: Click the playback, select the date and time, select the local playback or SD card playback, search the video files and double click on the file to play. PTZ control operation interface, control the camera to rotate horizontally and vertically. Control the camera zoom in/out, focus +/-, left / right and up / down cruise.
Video: Set the video format, video coding, resolution, bit rate, max frame rate, key frame interval, bit rate control and image quality. OSD Set: Set time stamp, time show, camera name and name show in this interface. Image: Adjust the brightness, saturation, contrast, exposure parameter and set the WDR, Aemode, Imgmode, Intelligent night mode, IR LED Control, IRCut in this interface. (The camera does not support full colour night vision and smart night vision currently.
6.4.3 SettingAlarm Audio alarm: Enable this function. Need to connect a buzzer, turn on & adjust the volume, audio alarm can work well. Motion detection: There are 4 windows selections under Motion Detection. Select different windows to display different window positions. Drag the selected window to enlarge the window proportion. Manually type the sensitivity value or swipe the sensitivity bar to adjust the sensitivity. Alarm: Email setting method is the same as Phone APP.
Timed record: Set the Record files duration, whether to open Record and stream. Email Setting: FTP Setting: Terminal: Set the cruise laps, select the centred while self-check on/off, close the alarm PTZ movement on/off and indicator display mode. 485Set: These cameras can’t support RS485. Multiple setting: In the same LAN, two or more of this series products from our company's, can be displayed on the same page via this Multiple Setting.
7. Video Management Software (P2P Client) Using Video Management software to view multiple cameras at the same time 7.1 Software installation Download from the website ( https://JideTech-cctv.com ) or Mini CD in the Package. Install it on your computer. 7.2 Add Camera A） Open the software, click , to login system, default password: leave it blank.
B） Click to Set an Area name (Like: office / home / factory……), you also can modify and delete Area as picture showing below. C） Click “Search” to find IP Camera in the LAN, Select the camera click “add” to Add camera.
D） Double Click camera’s UID to modify camera’s password. E） Click Back to preview screen, Double-click the camera name in the device list to preview the screen in real time. .
Frequently Asked Questions Q1: Remote viewing, appear pause and delay phenomenon? A:1) Related to network data, it is recommended to adjust the HD mode to Smooth mode when watching, and the video file is still saved in HD mode. 2) Try to reduce the camera stream when view the video, reducing the stream may affect the quality of the image. 3) Remote viewing, the network recommends uploading network data up to 512KB/S. Download data 256KB/S to watch the best.
A: rtsp：//192.168.1.100：554/11 Q11: WBE browsing plug-in installation problem A: Web page online download plug-in component: ActiveX, Or install the plug-in program in the CD! Q12: Third party software: iSpy Software operation A: iSpy Add camera selection: Open the software click add object, Select the IP photographer, Click ONVIF to enter the user name and password. URL enter: http:// camera IP address / port 8080.
Service Guarantee If you have any other questions, please visit the official website of our company or consult the customer service email address. Company Name: ShenZhen JideTech Development Co., Limited Company Address: 9F Niulanqian Building Minzhi Avenue, Minzhi Street, Long Hua District, Shenzhen Guangdong, China, 518109 Website: www.jidetech-cctv.com Email: cindyhe@jidetech.
Not all Security Camera Named JideTech
