User Manual
Table Of Contents
- Wi-Fi IP CAMERA
- 1.Introduction
- 2.Installation
- 3.SD Card Slot
- 5.Mobile APP Connection
- 5.1 Connect Hot-Spot
- Connect power supply and use your mobile device to
- 5.2 Add Camera
- Add your camera to ‘CamHipro’ APP follow the steps
- 5.6.1 Video playback and download
- 5.6.2 Local files, device list and add other new c
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- Click “Change Password” to modify the password. Ol
- 5.6.5 Alarm management and notification
- 5.6.9 Video setting and audio setting
- 5.6.10 SD card plan recording
- 5.6.11 SD card setting
- 5.6.12 Device time setting
- 5.6.13 Default setting
- 6.Computer Browsing Access
- 7.Video Management Software (P2P Client)
- Service Guarantee
- 18 -
6.4.3 Setting
Alarm
Audio alarm: Enable this function. Need to connect a buzzer, turn on & adjust the volume, audio alarm can
work well.
Motion detection: There are 4 windows selections under Motion Detection. Select different windows to
display different window positions. Drag the selected window to enlarge the window
proportion. Manually type the sensitivity value or swipe the sensitivity bar to adjust the
sensitivity.
Alarm: Email setting method is the same as Phone APP. Set the FTP server setting and Image capture in
this interface.
Schedule: Select the time and click on the “Apply”.
6.4.4 Setting
Advanced
User: For Change password.
Auto snap: Time capture, Choose to set the SD card snap interval or FTP snap interval and save route.