Quick Operation Guide

Q15: Can't search for the camera IP address in the local area network.
A: Our device default IP address network segment 192.168.1.X, you need to modify your network IP address network segment to
the same network segment, then use the search tool on the CD to search for IP addresses.
Q16: How to make the camera automatically cruise after setting the preset point?
A: Preset point 1-16 call command 41, 17-32 Calling Command 42, 65-80 Calling Command 43, 113-128 Calling Command 44,
128-144 Calling Commands 45, 146-160 call command 46, 161-176 Calling Command 47, 177-192 call command 48.
Q17: Mailbox alarm cannot receive pictures
A:1) Motion detection mailbox alarms support most mailboxes such as Google, Yahoo, etc. If you do not receive an email alert,
please check if the mailbox settings are set according to the instructions, whether to pass the test.
2) Some alarm messages may be judged as spam by the mailbox, can be found in the mailbox trash or send mail delay due to
network server data congestion, etc.
Q18: Can I add a camera to multiple phones?
A: Yes. Manually add the camera UID number to other mobile APP after the camera is connected to the network.
Q19: I can view the image on the same LAN, but the phone can't be viewed remotely outside.
A:1) The camera may be connected to your local area network without connecting to your router's external network, no network
access! It is recommended to check if the router has set this camera IP to prohibit network access.
2) Restore factory settings, reset the router Wi-Fi and reconnect..
Q20: The phone can't access the Internet after the phone is connected to the camera wireless hot-spot.
A: The camera wireless hot-spot is convenient for the device to preview and view the image by mobile APP in a network-free
environment and the phone can't access the external network by the wireless hot-spot.