Installation Guide

6.Loosely attach mounting brackets to the countertop, parallel to the cutout opening using
the supplied mounting screws and nuts. Mounting screws with brass inserts with brass in
serts are supplied with the sink, however, countertop material vary and the correct type of
fasteners should be recommended by your installer or supplier.
7.Clean sink flange and underside of cutout area o
f countertop, making sure that the area
is smooth and free of grease. Apply continuous bead of silicone caulk evenly on top of sink
flange.(FIGURE 4)
8.Position and align sink over the countertop opening and press sink onto countertop. Turn
bent end of mounting bracket to snug over the sink rim.(FIGURE 5)
9.Check alignment of sink again and tighten fasteners to secure sink.
10.Wipe away excess silicone caulk with damp cloth. Connect drain and water supply
according to manutacturer's instruction. (FIGURE 6)
FIGURE 4 FIGURE 5 FIGURE 6
Installation Instructions
For Undermount Sink