DIGITAL BLUETOOTH AM/FMDUAL ALARM CLOCK RADIO MODEL: JCR-228 USER MANUEL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom enclosure of the apparatus. The Rating plate is located at the bottom enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
SAVE THESE INSTRUCTIONS COMPLIANCE WITH FCC REGULATIONS FCC ID 2AE7AJCR228 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
DEAR JENSEN CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
POWER SOURCE This unit is designed to operate on AC 120V~ 60Hz. Operating this unit on any other power source may cause damage to the unit, and such damage is not covered by your warranty. It is also equipped with a battery back-up system for the clock that is powered by 2 X AA (UM-3) batteries (not included).
After you reset the time, be sure to reset your alarm settings as well. Various Functions and Operating Method 1. Alarm Clock 2 2. Alarm Clock 1 3. Previous/Select Channels Backward/Hour Adjustment 4. Next/Select Channels Forward/Minute Adjustment 5. Play/Pause/Auto Search/Select 6. Power/Mode 7. Setting/Time/Memory 8. LED Light Adjustment 9. Volume + 10. Volume 11. Sleep/Slumber 12. Audio Input 13. Antenna 14. PM Light 15. Alarm Clock 1 Indicator 16. Alarm Clock 1 Radio Indicator 17.
20. Alarm Clock 2 Radio Indicator 21. Audio Input Indicator 22.
SETTING THE CLOCK TIME In order for the clock to function properly, the clock has to be set before you use it for the first time. After powering up the unit or press and hold PRESET/TIME Button (#7) at standby mode, the clock display will flash. To set the time, follow the steps below: 1. Tap the TUN-/HR/ / TUN+/MIN/ Buttons (#3/#4) until the correct time is displayed.. 2. Press the PRESET/TIME Button (#4) to confirm the time. Note: Make sure the hour is set so that AM or PM is correctly displayed.
BLUETOOTH OPERATION Pairing a Bluetooth enabled device with the JCR-228. 1. Press the MODE / Button (#6) repeatedly to turn on unit and select Bluetooth mode, “bt” will show on the LED Display. The BLUETOOTH INDICATOR (#17) will flash. 2. Turn on the Bluetooth function for the device you want to link to, and enable the search or scan function to find the JCR-228. 3. Select "JCR-228" from the device list when it appears on your device screen.
3. Press ALARM 1 Button (#2) to confirm. The LED display will show the alarm time. 4. Press TUN-/HR/ OR TUN+/MIN/ Buttons (#3/4) to set the hour and minute of the alarm time. 5. Press the ALARM 1 Button (#12) to confirm the alarm time. The LED display will show the volume level. OR TUN+/MIN/ Buttons (#3/4) to set the volume level. 6. Press TUN-/HR/ 7. Press the ALARM 1 Button (#12) to confirm the volume level. The LED display resume display the current time. 8.
Notes : • If you connect the JCR-228 to the Line-Out Jack of your external device, you only need to adjust the VOLUME CONTROL of your JCR-228. If you connect to the Headphone Jack of your external device, you may need to adjust both the volume controls of your external device and the JCR-228 to obtain the desirable listening level. • Remember to turn off the JCR-228 when you have finished listening. Don't forget to switch off the power of your external audio device as well.
At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to find a recycler in your area. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
custserv@spectraintl.com for updated information on the unit requiring service. In some cases the model you have may be discontinued, and SPECTRA reserves the right to offer alternative options for repair or replacement. SPECTRA MERCHANDISING INTERNATIONAL, INC. 4230 North Normandy Avenue, Chicago, IL60634, USA. 1-800-777-5331 To register your product, visit the link on the website below to enter your information. http://www.spectraintl.com/wform.
