User's Manual

6
n Install batteries with the positive (+) & negative (-)
in the correct direction indicated by the AAA
battery compartment label.
n Replace the battery compartment cover.
n Switch on the Keyboard.
n Before first time of use, you need to pair the
keyboard to the receiver as below:
Use a paperclip, pen or pointed object to press
into the reset pin hole on the back of the keyboard,
the LowBatt Led will twinkle. Plug the receiver int
the PC’s USB port, the LED will be off if it is
successfully paired.
n Keyboard LED function
Low Battery----This LED will be lit if the
battery power is low, you should replace the
battery right now.