User's Manual

5. Use guide
5.1 Battery Installation
a. Unlock the battery cover
b. Install the battery and match the code
Need to check and match the code for the first of time of usage only, Please match the
code as below :
1. First, confirm the receiver has been connected to the computer.
2. With the keyboard close to the receiver within 50cm,hold down“ESC” key and enclose two
pieces of batteries, a few seconds later, when the receiver’s led blinks one time ,the keyboard is
ready to be used
Caution:
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions