Instructions / Assembly

ManualsBrandsJJM ManualsHeater AccessoriesRefill for NBT-23 Acidic Condensate Wastewater Neutralizer

NBSeries

Installation Operation

& Maintenance

Models: NBT-23

69 Ferry Street - Units 17 - 20

Easthampton, MA 01027 | 413-527-1893

2400 Feather Sound Drive, Clearwater, FL 33762

413-427-3373

jjmboilerworks.com

Revised - September, 2016

Acidic Condensate pH Treatment Tank

Summary of content (7 pages)

PAGE 1
Revised - September, 2016 NBSeries Installation Operation & Maintenance Models: NBT-23 Acidic Condensate pH Treatment Tank 69 Ferry Street - Units 17 - 20 Easthampton, MA 01027 | 413-527-1893 2400 Feather Sound Drive, Clearwater, FL 33762 413-427-3373 jjmboilerworks.
PAGE 2
NBseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance Overview Read before proceeding What is pH? Always use eye protection and plastic or rubber gloves when installing, recharging, adding water, or cleaning the NBT-23 tank. Failure to comply with these guidelines could result in severe personal injury, death or substantial property damage. The pH measurement of a fluid is an indicator of the acidity or alkalinity. Neutral fluids have pH of 7.0.
PAGE 3
NBseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance Installation 1. 2. 3. 4. 5. 6. Remove Clear Cover machine bolt and nuts at both ends of cover. Remove shipping bubble wrap and safely discard. Remove “Date of installation label” and the “red warranty tag”. Remove the wall mounting “J” hook brackets. Remove the pH power pellet™ bag. Remove porous pellet bag from plastic shipping bag before placing in the NBT-23 tank. Wall hung units: 1.
PAGE 4
NBseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance NBT-23 pH Treatment Tank Installation Figure 1 JJM BOILER WORKS INC NBT-23 pH Treatment Tank – features and dimensions NBT-23 pH Treatment Tank JJM BOILER WORKS INC 2 2 1 2 1 2 1 1 3 3 C 3 3 B B D 4 4 D C 55 5 5 4 4 5 A 5 5 5 A NBT-23 pH Treatment Tank Ratings & Dimensions (in inches) pH Treatment Tank/Single Unit MBH MBH Flow Rating 1Flow to 300Rating 0 to 2.
PAGE 5
NBseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance Piping Methods Do not install the NBT-23 in a vertical position. Only mount in a horizontal position on the floor or wall mounted horizontally using the mounting brackets provided.
PAGE 6
NBseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance Piping Methods Figure Figure 6 6 Piping for Multiple Heating Units with Common NBT-23 pH Treatment Tank. Common Flue Vent with Separate NBT-23 pH Treatment Tank. Piping for Multiple Heating Units with Common NBT-23 pH Treatment Tank.
PAGE 7
NBseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance Figure 8 Wall Mounting Piping: The NBT-23 can also be wall mounted by using the wall mounting brackets supplied with the unit. Always make sure that the method of wall mounting will support the weight of a fully operating NBT-23 unit. (8.5 U.S. pounds). Piping and pipe clamps should also Piping for Single Heating Unit/Individual NBT-23 pH Treatment Tank/ be used.