User's Manual

1. Product Information

1.1 Introduction

The IEEE 802.11b/g wireless USB adaptor enables users to surf the wireless

network at 54Mbps in the 2.4GHz radio frequency. This adaptor is also downward

compatible to IEEE 802.11b wireless devices at a maximum 11Mbps data rate.

Someone may configure this adaptor either with ad-hoc mode to connect with

alternative 2.4GHz wireless computers or with infrastructure mode to connect to a

wireless AP or router for the internet access. This adaptor includes a convenient

utility for scanning available networks and saving preferred networks that users

usually connected with. Security encryption is configured via this utility as well.

1.2 Product Features

Thank you for purchasing this high-speed wireless network adaptor! This wireless

network adaptor supports the IEEE 802.11b/g wireless standards. With

easy-to-install USB 2.0 interface - a very common expansion port of computers –

plug this wireless network adaptor into any empty USB port of your computer, just

that simple!

 Main features

1. Complies with wireless IEEE 802.11b/g standards

2. High speed transfer rate up to 54Mbps

3. Supports USB 2.0/1.1/1.0 interface

4. Supports 64/128-bit WEP, WPA (TKIP with 802.1x), WPA2 (AES with IEEE

802.1x) for high security level

5. Operating system supports: Windows 98se/ME/2000/XP/Vista/Linux/MacOS

*Maximum performance may vary depending on network conditions and

environmental factors.

1.3 System Requirements

1. CPU: Pentium III 1G above or similar

2. Memory size: 256MB RAM

3. One CD-ROM drive

4. Hard disk: more than 100MB available space

5. One available USB 2.0 port (USB 1.0 port will largely degrade the

performance)

6. Operating system: Windows 98se/ME/2000/XP/Vista/Linux/MacOS