User Manual

Copyright © jjPlus Corporation. All rights reserved. www.jjplus.com / [e-mail] / [phone] v1.0.2
jjPlus Corp.
15F-7, No, No. 2, Jianba Road, Zhonghe District, New Taipei City, 235
TEL: [phone] FAX: [phone]
1. It cannot charge some small Qi electronic devices such as TWS Bluetooth headset due to the limitation
of coil size.
2. This product has FOD (Foreign Object Detection) function. When metal objects (such as keys, ID cards,
credit cards, bus cards, etc.) appear in the charging area, the wireless charger will automatically stop
charging. However, it is still necessary to avoid placing smart cards such as ID cards, credit cards, bus
cards, access cards, etc. in the charging area to avoid being damaged.
3. Please don’t put anything with RFID function into the charging area, such as ID cards, credit cards,
deposit cards, security badges, passports, and key fobs while the phone is charging. These RFID cards
could run the risk to be damaged by the magnetic field of the wireless charger.
4. Please don’t directly expose the wireless charger to the sunlight or install it close to any heating
equipment such as microwave oven, roaster, and water heater.
5. Please don't toss, pressure, or puncture the wireless charger. High external pressure will cause damage
to the device.
6. Please don’t put any metallic objects into the charging area. The charger will stop charging
automatically when metallic objects are placed within the charging area. Please remove the metallic
objects and the phone will resume charging after a few seconds.
7. If charging is stopped with unknown reasons other than metallic foreign objects, please remove the
mobile phone and then place it back into the charging area.
8. Each mobile phone has its own wireless charging behavior, and the charging speed could be different
on the charger by various of charging algorithm. The charger cannot guarantee whether the phone
enters fast charging or not.
9. This product should be only installed under non-metallic tabletops, such as marble, glass, wood,
plastic, and other non-metallic materials. For composite tabletops, please confirm whether it contains
metal components
10. Please use the original accompanied AC adaptor to power the wireless charger for best performance.
Notes