User Manual

FAQ’s

? How do I use a microphone with the THAT-2?

! THAT-2 needs a “Line level” signal to send audio

down the phone line. You will either have to use a

microphone pre-amplifier or a mic mixer.

? I have been using my THAT-2 for recording and it

works great but when I try to send audio down

the line it won’t work.

! Several things could be causing this problem: First

you must send a line level signal into the “To Phone”

jack on THAT-2. Second, make sure the gray button

is in the “In” position. This disables the handset mic

and enables the audio input. Third, check the ABC

switch.

? I'm using THAT-2 for interview recording and

playback over the telephone. Every time I press

in the gray button I get a loud squeal and feed-

back. How do I fix this?

! Try changing the setting of the ABC handset selector

switch. If the handset type is not set correctly you

could get the feedback you are describing. Trial and

error works best to find the right handset type but this

info also may help. Handset Types:

• A=Electret

• B=Dynamic

• C=Carbon