users manual

6
BlueDriver-F3 Wireless Audio Interface
Bluetooth Wireless Technology
Pairing to a Cell Phone
1. While BlueDriver is o󰀨, set the
Role Select Switch to <Phone>.
2. From the powered-o󰀨 state*,
hold the <Connect> button on the
BlueDriver for at least 6 seconds.
Upon release, the blue LED should
ash rapidly as the BlueDriver
enters Pairing Mode.
* See page 8 for instructions on how to turn
o󰀨 BlueDriver-F3.
3. On your device, nd and select
the option to set up a connection.
When the cell phone has found
the new device, select from the list
the device ID of "JKBDRVF3xxxx"
where: xxxx is the last four digits of
the serial number.
Note: Connecting via Bluetooth wireless
technology varies with di󰀨erent cell phones.
4. If asked for a pin, enter "0000".
5. When bonding is complete,
the blue LED will ash at a rate
of 2 seconds o, 1 second on.
(2
s o, 4 s on for HD Voice).
Subsequent connections can be
made more quickly from Idle Mode
by holding the <Connect> button
for only 2 seconds before releasing.