users manual

Pairing to a Headset
1. While BlueDriver is o󰀨, set the
Role Select Switch to <Headset>.
2. Following manufacturer’s
instructions, set your headset to
Pairing Mode.
3. From the powered-o󰀨 state*,
hold the <Connect> button on the
BlueDriver for at least 6 seconds.
After you release it, the blue LED
should ash rapidly if the BlueDriver
is in Pairing Mode.
* See page 8 for instructions on how to turn
o󰀨 BlueDriver-F3.
4. When bonding is complete,
the blue LED will ash at a rate
of 2 seconds o, 1 second on.
(2
s o, 4 s on for HD Voice).
Subsequent connections can be
made more quickly from Idle Mode
by holding the <Connect> button
for only 2 seconds before releasing.
7
Bluetooth Wireless Technology
Bluetooth Wireless Technology