users manual

Connect the USB cable to the mini
USB connector on your BlueDriver
and a USB power source to charge
the battery. The red LED will ash to
indicate that the battery is charging,
once charging is complete, the LED
will turn o󰀨.
If the battery becomes completely
discharged for an extended period of
time, the red LED will not ash until it
can begin its charge cycle. This may
take several minutes.
If the USB cable is connected when
the unit is shut down, the blue LED
will stay lit. If the unit is in use, the
blue LED will indicate the current
connect mode. Feel free to use your
BlueDriver while it is charging.
Note: BlueDriver-F3 draws very little power
when charging. Unfortunately, some portable
power banks automatically turn o󰀨 if the target
device does not draw enough power.
4. Receive→Headphone
The 3.5mm headphone output
contains the audio received from
your Bluetooth device. This audio
is suitable for a live phone call back
to the radio station or monitoring
audio/video playback.
Note: Units BEFORE serial number
#BDF301949 feature a recorder output
instead of the headphone output.
Mic Trim
A small at blade screwdriver can
be used to adjust the trim pot on
the back of the unit. This adjusts
the level of the audio coming from
the microphone as it is sent to the
Bluetooth enabled device.
3
Getting to know your BlueDriver-F3
Getting to know your BlueDriver-F3