BSET-HS1™ Wireless Headset User Guide JK Audio
Welcome Thank You Thank you for purchasing the JK Audio BSET-HS1 headset. Please read this guide for instructions on setting up and using your new headset. Getting Assistance If you have technical or application questions: In the US & Canada, call us toll free at: 800-552-8346 All other countries dial: 815-786-2929 (M-F 8:30-5:00pm Central Time Zone) Email us at: support@jkaudio.com Or, check out our FAQ section for answers to common questions.
Overview Features Introducing the New Range of Mobility. Bluetooth 2.
Controls & Indicators Getting Started Headset Controls Charging Your Headset Answer Button (Multi Function Button) Volume Down Volume Up LED Status Indicator (Red/Green) USB Port Mute Button Microphone When it's necessary to charge your headset, the LED Status Indicator will flash red. Also, a two-tone melody repeats every 30 seconds in the earpiece. Once a low battery level is indicated, there are approximately 2-3 minutes of battery life remaining.
Pairing Your Headset Note: Before using the headset, it must be paired and connected to another device equipped with Bluetooth wireless technology. For specific instructions, check the user's guide for your phone. Using the Headset Pairing Your Headset 1. Enable the Bluetooth wireless technology feature on your phone or other device. Make a Call Dial the number on the mobile phone and press the Answer Button. 3. Perform a search for enabled devices on your phone or computer.
Using the Headset Headset Ring Alert The Ring Alert in the headset varies depending on your telephone model. With some phones, your own ring tone will play through the headset. In this case, the volume and ring tone can be adjusted on the phone. With other telephone models, the headset's internal Ring Alert will be used when you receive an incoming call. You can choose between two different internal Ring Alerts.
Connecting to a JK Audio BlueSet BlueSet-F4™ JK Audio™ Phone Safe & Efficient Use Connecting to a BlueSet 1. Set the Headset / Phone switch on the BlueSet to the Headset position. 2. Enable Pairing Mode on your BSET-HS1 headset (see pg 4). 3. Hold the Connect button on the BlueSet for 5 seconds and release to activate Pairing Mode. BlueSet will automatically pair to the first device it finds that is in Pairing Mode.
Help & Tips Technical Information Battery Information The BSET-HS1 is equipped with a rechargeable Lithium-Ion battery. These batteries do not have a “charging memory” and can be recharged at any time without changing their life expectancy. Battery capacity and life span may be reduced if the device is exposed to extreme high or low temperatures, The headset may stop working until it is back to room temperature. To get the most out of your headset, the battery should not be allowed to fully discharge.
Declaration of Conformity Help & Tips Trouble Shooting Cont'd If some features are not working with your phone: Check the user's manual of your phone for missing settings or functions that need to be activated. Mobile phone manufacturers may implement Bluetooth wireless technology functions in different ways. The unit should work with all phones that support the Headset and Hands-free Bluetooth profiles, but functionality may vary depending on the telephone model you use.
FCC-B Part 15 Compliance Notice FCC-B Part 15 Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
™ BSET-HS1 Wireless Headset JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815-786-2929 Toll Free: 1-(800)-jkaudio Fax: 815.786.8502 www.jkaudio.com © 2011 JK Audio, Inc. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JK Audio, Inc. is under license.
