CellTap 4C™ Wireless Phone Audio Tap User Guide JK Audio
Welcome Thank You Limited Warranty Thank you for purchasing the JK Audio CellTap 4C™. Please read this guide for instructions on using it. CellTap 4C is covered by a 1 year warranty to be free from defective workmanship and materials. To obtain service, contact JK Audio by phone or email for return authorization. Once authorized, you will carefully pack and ship the faulty product and all accessories to us. You will pay for shipping to us and we will pay for return back to you.
Safety Precautions RF Noise Wireless phones generate substantial radio frequency (RF) noise during a call which can easily leak into audio cables or equipment. Be sure to keep the wireless phone 1-2 feet away from any audio cables or equipment. It is also important to keep the wireless adapter cord away from any other audio cords. Road Safety WARNING! There are many laws that prohibit the recording of telephone conversations without prior consent from both parties. Be sure to check the laws in your area.
Contents iv Setup vi Overview 1 Configuration 2 FAQs 4 Technical Information 5 CellTap 4C Wireless Phone Audio Tap
Features Features HD Voice* Screwdriver Caller Level adjustment 3.5 mm TRRS Headset Jack Switch Selects Between Popular TRRS Configurations 3.5 mm TRRS Cable to Device 3.5 mm TRS Stereo Mic Level Output to Recorder Passive, no AC or Battery Power Needed * HD Voice. While standard phone calls have a narrow bandwidth of 300 Hz to 3.4 kHz, HD Voice calls offer 50 Hz to 7 kHz bandwidth. The additional 1.
Setup Connect to your smart phone using the supplied CN150. Connect your earbud headset. MIC 00:00:00 L R PLAY/REC MENU vi CellTap 4C Wireless Phone Audio Tap Connect to a recorder, mixer or PA system with a 3.5mm stereo cable.
Overview Introducing CellTap 4C CellTap 4C™ is an interview-recording adapter that connects between your existing earbuds/headset and cell phone, providing stereo output to a recorder or mixer. CellTap 4C™ is compatible with most smart phones, tablets, and notebooks that use the 3.5 mm 4-conductor TRRS headset jack. Simply connect CellTap 4C between your existing ear-bud headset and phone, and then connect the stereo output to a mic level input on your recorder or mixer.
Configuration TRRS Configurations If the headset is not working properly, try changing the TRRS configuration. To switch the standard, disconnect all cables, open up your CellTap 4C by removing the cover, flip the switch and close it back up.
Configuration Caller Level Trim Pot Caller Level Trim Pot adjusts the level of Caller audio on your recordings. This adjustment lets you more closely match the level of your voice to the caller' voice. This ratio will likely remain the same after the initial adjustment.
FAQs Will CellTap 4C work with any cell phone? What if my phone does not have a headset jack? CellTap 4C has been tested with many popular brands and model phones that use the 3.5 mm 4-conductor TRRS style headset. However, there are no industry standards, so we cannot promise compatibility with any brand or model phone. CellTap 4C works with most original manufacturer (Apple, Samsung, etc) headphone adapter cables.
Technical Information transmit power when signal strength weakens. This may occur in vehicles and large buildings, as well as rural areas. 1) Check the User Guide for instructions on adjusting the internal headset type switch. 2) Try positioning cables and your recorder away from the phone. Specifications Output 1/8” (3.5mm) Stereo: 600 ohms, 2.4 mV RMS (-50 dBu nom.) MISC Size: 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm) Weight: 3.
CellTap 4C™ Wireless Phone Audio Tap User Guide Version 4/16/22 JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815.786.2929 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com © 2022 JK Audio, Inc. All rights reserved.
