Daptor Two Wireless Phone Adaptor User Guide JK Audio
Description Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone. Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.
Connection Connect the enclosed audio adapter cord between Daptor Two and your wireless phone’s headset jack. Your wireless phone should now recognize Daptor Two as a headset and disable the phone’s mic and earpiece. Now connect either the XLR or 1/4” input and output to your mixer or tape recorder. You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4" output jacks.
Connection Daptor Two will provide the highest quality connection possible between your audio equipment and cellular telephone. However, due to the unpredictable nature of wireless telephone service we cannot guaranty excellent audio quality every time Daptor Two is used. Audio quality is still mostly dependent upon the connection provided by your wireless telephone service. As a general rule, the better the cell phone signal, the better your audio quality will be.
Compatibility Wireless Phone Compatibility This product was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5 mm jack. JK Audio does not supply these adapters. You must contact your wireless dealer or your local electronics store to purchase these adapters.
FAQ’s ? Will Daptor Two work with my model ____ ! cell phone? As long as your wireless phone has a 2.5 mm earpiece jack and accepts a generic 3rd party earpiece or headset, you should be OK. ? What if my phone does not have a 2.5 mm ! earpiece/ headset jack? Many phone manufacturers sell an adapter that allows connection of a 2.5 mm plug. You can often find these adapters where you purchased your phone or in electronics stores.
Specifications Input Connectors: XLR 1/4" mono Output Connectors: XLR 1/4" mono Wireless Headset Jack: Balanced 600 ohms, line level, 0 dBm max input. Unbalanced, line level, 0 dBm max input. Balanced 600 ohms, mic level, -25 dBm avg output. Unbalanced, mic level, -25 dBm avg output. ¼” - 3 conductor 36” cable provided (¼”- 3 conductor to 2.5 mm 3 conductor) Passive, no AC or battery power needed. Size: 4.5” x 3.2” x 1.3” (11.4 x 8.2 x 3.3 cm) Weight: 9 ounces.
Warranty The model Daptor Two is covered by a 2 year warranty to be free from defective workmanship and materials. In the event that the Daptor Two needs repair, you must call us to get an authorization, and then carefully pack and ship it to us. You will pay for shipping to us and we will pay for return back to you, UPS ground. No free repairs will be made if the defect was caused by misuse, weather conditions, or other cause, except for defective workmanship or materials.
