Daptor One Wireless Phone Adaptor User Guide JK Audio
Description Daptor One is a simple interface that converts the 2.5mm headset jack on your wireless cellular phone to a modular phone line jack. This modular RJ-11 jack then connects directly to any JK Audio RemoteMix series mixer. You will continue to use your wireless phone to dial or answer the call, but you will use the microphone and headphones plugged into your RemoteMix during the call. Daptor One does not require any batteries or power supply.
Connection Connect the enclosed modular phone line cord between the Phone Line jack of your RemoteMix and the phone line jack on Daptor One. Then connect the enclosed audio adapter cord between Daptor one and your wireless phone headset jack. On your RemoteMix unit, switch on the power and then switch the Phone Line switch to "Dial / Talk". You may now place or receive a call using the buttons on your wireless phone.
Connection Daptor One will provide the highest quality connection possible between your RemoteMix unit and cellular telephone. However, due to the unpredictable nature of wireless telephone service we cannot guaranty excellent audio quality every time Daptor One is used. Audio quality is still mostly dependent upon the connection provided by your wireless telephone service. You should keep in mind that your wireless telephone also has level control.
Compatibility This product was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. We've designed a circuit which emulates the electrical characteristics of these headsets. Daptor One should work with all wireless phones that accept generic third party headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5mm jack.
FAQ’s ? Will Daptor One work with my model ! _______ cell phone? As long as your wireless phone has a 2.5 mm earpiece jack and accepts a generic 3rd party earpiece or headset, you should be OK. ? Can I use the Daptor One with my mo! dem? No. Daptor One was designed for JK Audio RemoteMix series mixers only. It does not provide the necessary talk battery or ring voltage required by modems, fax machines or other manufacturers remote mixers.
Specifications RemoteMix Phone Line Jack: RJ-11 12” modular cord provided Wireless Headset Jack: ¼” - 3 conductor 36” cable provided (¼”- 3 conductor to 2.5 mm 3 conductor) Size: 3.6” x 1.6” x 1.3” (9.2 x 4.1 x 3.3 cm) Weight: 7 ounces .
Warranty The model Daptor One is covered by a 2 year warranty to be free from defective workmanship and materials. In the event that the Daptor One needs repair, you must call us to get an authorization, and then carefully pack and ship it to us. You will pay for shipping to us and we will pay for return back to you, UPS ground. No free repairs will be made if the defect was caused by misuse, weather conditions, or other cause, except for defective workmanship or materials.
