User Manual

Connection - Alternate Setup Diagrams Simple Setup for Mixer

Number of mics

depends on mixer

Caller to any line

level input on mixer

Aux Send A (pre-fader) on

mixer to Send on hybrid

Use Main Outputs,

USB or Firewire

connectors to

send audio to

recording device

For whichever input channel you have the Caller connected to, turn the

corresponding Aux A control to minimum (usually hard left). All other Aux

A controls should be set for what you want to send to the phone line.

Each Aux Send bus is completely separate from all other outputs, so

these Aux controls will not affect what is heard on the Main outputs or on

any other Aux buses. This Aux Send bus should be pre-fader if possible

so you can use the Level controls (faders) to set each channel at the

main recording output without changing the levels you send to the caller.

Figure 4: Simple Setup for Mixer

Auxiliary telephone optional.

Used to dial out to set up calls.