Pureformer™ Stereo Isolation Transformer User Guide JK Audio
Welcome Thank You Thank you for purchasing the JK Audio Pureformer™. Please read this guide for instructions on using it. Getting Assistance If you have technical or application questions: In the US & Canada, call us toll free at: 800-552-8346 All other countries dial: 815-786-2929 (M-F 8:30-5:00pm Central Time Zone) Email us at: support@jkaudio.com Or, check out our FAQ section for answers to common questions.
Contents Overview 1 FAQs 2 Technical Information 3 Note: While Pureformer was designed to be very rugged and durable, it is not waterproof and care should be taken to keep the unit dry.
Features Just Insert Between your Sound Card and your Audio Mixer or Amplifier High-Quality, Low-Distortion, 600 ohm Audio Transformers Line In iv Pureformer Stereo Isolation Transformer Line Out
Overview Introducing Pureformer The Pureformer provides hum and noise reduction for sound cards and audio equipment, and removes ground loops and DC paths that can cause hum and signal breakup. Isolate the Problem The Pureformer isolates the electrical grounds of two pieces of audio equipment. This is especially important in the case of computer audio cards connected to high quality/low noise audio equipment.
FAQs Will the Pureformer eliminate the 60 cycle AC hum I have on my recordings? No. The Pureformer cannot remove noise after it has already entered the audio signal. It will only prevent noise from entering before the recording takes place.
Technical Information Specifications Line In RCA: 600 ohms, 250 mV RMS (-10 dBu nom) Line Out RCA: 600 ohms, 250 mV RMS (-10 dBu nom) Misc. Frequency Response: 20 Hz-20 kHz, ± 0.1 dB Insertion Loss: 0.8 dB Size: 3.6" x 1.8" x 1.3" (9.2 x 4.6 x 3.
Pureformer™ Stereo Isolation Transformer User Guide Version 4/16/22 JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815.786.2929 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com © 2022 JK Audio, Inc. All rights reserved.