User Manual

19
notice isn't practical, you'll be notified as soon as possible. You'll be
given the opportunity to correct the problem, and you'll be informed of
your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the proper
functioning of your JK Audio product. If such changes are planned,
you'll be notified by your telephone company.
FCC-A Part 15 Compliance
FCC Registration (continued)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-ence
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his/her
own expense.
Changes or modifications not expressly approved by JK Audio can void the
user's authority to operate the equipment.
FCC-B Part 15 Compliance
This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are de-
signed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communication. Operation of this equipment in a resi-
dential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by JK Audio can void the
user's authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order
to comply with the emission limits.
The internal antennas used for this mobile transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.