User Manual

Bluetooth Wireless Technology

This multi-function switch activates the Bluetooth Wireless Technol-

ogy. The blue LED directly above this switch indicates when it is on.

See pages 10-11 for more information.

Bass Boost

With this switch turned on, the Master Output audio will be sent

through the Bass Boost before being routed to the telephone circuits.

Keypad ON / OFF

This switch disables the DTMF keypad to prevent unwanted tones

from being transmitted down the phone line during a broadcast.

Ringer

RemoteMix 4 does not have an audible ringer but there is a visual

ring indicator that will flash for incoming calls. This red LED is lo-

cated directly below the keypad.

Phone Line Switch

When using the RJ-11 analog phone jack, this switch acts as the

switch-hook for the telephone line. The Hang Up position is the

normal on-hook position when you are not using the line or you are

waiting for a call. When you want to place a call, or when a call

comes in, switch to the Dial / Talk position.

Power

This is the main power switch that turns the unit on. Whenever the

power is turned on, the red LED above this switch will be lit. The

green AC LED will be lit whenever a live AC power source is con-

nected, even if the main power switch is off.

Keypad

The telephone keypad provides DTMF tone dialing. You may use the

keypad at anytime during a call but keep in mind that both transmit

and receive audio are muted during a keypress.

Redial

Press this button to instantly redial the last telephone number that

was keyed in.

Features