Owner's Manual

• For marine installations, do not connect the speaker’s
LED lights to the vessel’s navigational lighting circuits.
• For short-circuit protection, install a supplied fuse-
holder onto EACH speaker’s BLUE (+12V) LED power
connection lead.
• Connect all BLUE (+12V) leads together (parallel) and
connect to a switched +12V supply. Connect all
YELLOW (GND) leads together and connect to a
negative ground or to the NEGATIVE battery post.
• We recommend activating the speakers’ LEDs thru a
lighting circuit that supplies +12V via an existing switch.
If an existing switched circuit is not available, you may
install a dedicated toggle/rocker style switch that will
supply positive (+12V) power. Fuse this connection
according to how many LED circuits you have (LED
circuits x 150 mA).
[GND]
LED
[+12V]
Blue
Yellow
Blue
Yellow
Blue
Yellow
Blue
Yellow
LED
Fuse
Fuse
Fuse
[GND]
[+12V]
Blue
Yellow
Blue
Yellow
Blue
Yellow
Blue
Yellow
Blue
Yellow
Blue
Yellow
Blue
Yellow
Blue
Yellow
LED
LED
LED
LED
Fuse
Fuse
Fuse
Fuse
Fuse
For LED Models Only:
Example: One speaker pair of
LED circuits connected in parallel.
Example: Two speaker pairs of
LED circuits connected in parallel.