Owner's Manual

ere are two speaker cable routing options. For
applications where the cable cannot be routed through
the pipe, the cable can be passed through one of the
openings on the side of the xture.
1A
Determine the speaker mounting location, and
temporarily secure the two xture halves around the pipe
by hand tightening the four 1/4 - 20 x 1-1/4” machine
screws.
2
For applications where the cable can be routed through
the pipe, the cable can be passed through the opening on
the underside of the xture. Steps 2-3 are only needed
for this option.
1B
Adjust the angle of the xture to the to the desired
position, and mark the location for the speaker cable
hole. Remove the xture assembly, and drill a 1/2” hole
on the mark.
3
OR