OWNER'S MANUAL MX650-CCX-SG [LEDJ Cockpit Coaxial Speaker Systems with Blue LED Illumination Thank you for purchasing a ]L Audio Marine Coaxial Speaker System. With proper installation, your new speakers will deliver years of listening pleasure. We strongly recommend that you have your new marine speakers installed by your authorized ]L Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to properly install your new speakers.
MX650-CCX-SG {LED) Physical Specifications 6.5 in. I 165 mm 6.90 in. I 175 mm 6.125 in./ 156 mm 3.85 in. I 98 mm 0.97 in. I 25 mm ···········i ---········· ····--·········· ···- 5.00- 5.25 in./ 127-133 mm .......... .... .... ....... ........................................... .. _ .,......... I 70 - -· ........... .... .................... 2.74 --.. ---in.-·-·-··--------........._..______ ·--- ........... mm ,., " ...... .,,._________________ _____ .............
CCX models have woofers specifically designed for infinite-baffle applications. In plain english, this means that they are designed to operate without an enclosure behind them. The bass response of the speaker will suffer significantly if placed in a small enclosure. Ill cAUTION I mWARNINGI While these speakers are designed to be water and spray resistant, they are not designed to be submerged or to withstand high-pressure water spray.
TWEETER PROTECTION The crossover networks are equipped with an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure. This electronic device monitors current going to the tweeter and will disconnect the tweeter from the signal when it senses overload.
LED WIRING CONSIDERATIONS • Do not connect the speakers' LED lights to the vessel's navigational lighting circuits. • For short-circuit protection, install a supplied fuse holder onto EACH speaker's BLUE (+12V) LED power connection lead. COAXIAL INSTALLATION PROCEDURE Diagram A (page 6) shows typical installation procedures into a fiberglass panel, using the supplied hardware. Always follow proper safety procedures. Use eye-protection at all times and a dust mask and gloves when cutting.
DIAGRAM A .,.. -~ --- ~- --~ -@'"""- .,.~- --~ #8 SCREW: PILOT HOLE RECOMMENDATIONS Fiberglass Thickness 0.312 in. (7.92 mm) or less ~ii~1~li"illfi•i•l•l• • • • •=; 1L=·-•·l=r9 =i= .. ................ Recommended Pilot Hole Drill Size : 1/8 in. (3.18 mm) pilot hole i la._r9..~.~--~~-a..~ ..?·~-l-~--~~.: ..~?:~~--~~!.. . . . . . . ........... . . . . . . . . .:................. . . . . . . . . . . . . . . ?.!?.~. i.~_: ..~~:.?.! . ~.r:::.~..P..~!.?.~.-~?!~. . . . . . . . . . . .. . . . . . .
SPEAKER WIRING DIAGRAM: to tweeter negative input from amplifier positive output from amplifier negative output to tweeter positive input LED WIRING: Example: One speaker pair of LED circuits connected in parallel. q~Biue ~- Yellow--- q~Biue ~0 Yellow-•- Example: Two speaker pairs of LED circuits connected in parallel. q~Biue ~. Yellow-•. . q~Biue ~- Yellow _ __ Individually fuse each BLUE (+12V) lead and wire together (parallel) to a fused, switched +12V activation circuit.
LIMITED WARRANTY- MARINE SPEAKER SYSTEMS (USA) JL AUDIO warrants this product to be free of defects in materials and workmanship for a period of two (2) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized JL AUDIO dealer.
