Owner’s Manual
An Introduction Thank you for purchasing a JL Audio W7 subwoofer driver. The W7 embodies JL Audio’s commitment to pushing the envelope of speaker technology, with eight patented technologies, a design patent and a completely unique set of component parts. Each W7 model has been meticulously engineered to reproduce sub-bass with extreme fidelity at any volume level, provided it is installed and tuned properly.
s e i g o l o n h c e W7 T rced-Air-Cooled Patent #D472,891, 6 - Massive Fo loy Frame (U.S. Aluminum Al ) d d #6,229,902 un an rro Su ) livers cool air #6,219,431 1 - OverRoll™ d #5,949,898 n of the W7 de an il sig 47 de 7,2 is me th fra ,68 rs, ted ke to the voice co va ea te sp ele l e pla na pTh to tio (U.S.
W7 Mounting Guide Please review the mounting procedures thoroughly before attempting to remove the speaker from its shipping baffle. The W7 mounts like no other speaker and care must be taken to follow these instructions precisely. 2e 2c 1 2a Step 1: Your Tools When you remove the W7 from its shipping carton, it is attached to an MDF baffle board. Make sure you keep this baffle board and all the packing material in the unlikely event that the W7 ever needs to be shipped back to JL Audio for service.
Step 5: Ready to Install You are now ready to install the W7 into its enclosure. The parts are shown below. Step 6: Connect the speaker wires and place the W7 into the enclosure Connect the positive wire to the red terminal and the negative wire to the black terminal of the W7 (picture 6a). The 13W7 (not shown) has dual voice coils and must be wired with its coils in series or in parallel. Once the speaker is wired, gently lower it into the enclosure (picture 6b).
13W7-D1.5 Free Air Resonance (Fs): 23.5 Hz Electrical “Q” (Qes): 0.476 Mechanical “Q” (Qms): 7.517 Total Speaker “Q” (Qts): 0.448 Equivalent Compliance (Vas): 3.68 cu. ft. (104.3 ltrs) One-Way, Linear Excursion (Xmax)*: 1.25 in. (32 mm) Thermal Power Handling (Pt): 1500 Watts Continuous Reference Efficiency (no): 0.269 % Efficiency (SPL @ 1W/1m): 86.3 dB DC Resistance (Re): 2.41Ω Effective Piston Area (Sd): 107.35 sq. in. (0.0693 sq. m) Nominal Impedance (Znom): Dual 1.
Driver Specifications Grille Clearance: 2.7 in. (69 mm) from the bottom of the mounting flange to the lowest inside surface of the grille. Mounting Hardware: Twelve #12 x 1.75" long clear, zinc-plated steel Phillips pan-head sheet metal screws (included) or twelve #12-28 long steel Phillips pan-head machine screws with #12-28 T-Nuts, each at least 1/2-inch (12.5 mm) longer than the thickness of the mounting baffle (not included). Displacement: 0.21 cu. ft. (5.9 ltrs) Net Weight: 52 lbs. (23.
12W7-3 Free Air Resonance (Fs): 27.2 Hz Electrical “Q” (Qes): 0.514 Mechanical “Q” (Qms): 7.807 Total Speaker “Q” (Qts): 0.482 Equivalent Compliance (Vas): 2.33 cu. ft. (66.0 ltrs) One-Way, Linear Excursion (Xmax)*: 1.15 in. (29 mm) Thermal Power Handling (Pt): 1000 Watts Continuous Reference Efficiency (no): 0.249 % Efficiency (SPL @ 1W/1m): 86.2 dB DC Resistance (Re): 2.47Ω Effective Piston Area (Sd): 84 sq. in. (0.0542 sq.
Driver Specifications Grille Clearance: 2.6 in. (66 mm) from the bottom of the mounting flange to the lowest inside surface of the grille. Mounting Hardware: Twelve #10 x 1.75" long clear, zinc-plated steel Phillips pan-head sheet metal screws (included) or twelve #10-32 long steel Phillips pan-head machine screws with #10-32 T-Nuts, each at least 1/2-inch (12.5 mm) longer than the thickness of the mounting baffle (not included). Displacement: 0.14 cu. ft. (4.0 ltrs) Net Weight: 45 lbs. (20.
W7-3 Free Air Resonance (Fs): 30.6 Hz Electrical “Q” (Qes): 0.578 Mechanical “Q” (Qms): 7.647 Total Speaker “Q” (Qts): 0.537 Equivalent Compliance (Vas): 1.28 cu. ft. (36.1 ltrs) One-Way, Linear Excursion (Xmax)*: 0.9 in. (23 mm) Thermal Power Handling (Pt): 750 Watts Continuous Reference Efficiency (no): 0.171 % Efficiency (SPL @ 1W/1m): 84.3 dB DC Resistance (Re): 2.75Ω Effective Piston Area (Sd): 59.8 sq. in. (0.0386 sq.
Driver Specifications Grille Clearance: 2.25 in. (57 mm) from the bottom of the mounting flange to the lowest inside surface of the grille. Mounting Hardware: Twelve #10 x 1.75" long clear, zinc-plated steel Phillips pan-head sheet metal screws (included) or twelve #10-32 long steel Phillips pan-head machine screws with #10-32 T-Nuts, each at least 1/2-inch (12.5 mm) longer than the thickness of the mounting baffle (not included). Displacement: 0.09 cu. ft. (2.5 ltrs) Net Weight: 30 lbs. (15.
8W7-3 Free Air Resonance (Fs): 35.2 Hz Electrical “Q” (Qes): 0.654 Mechanical “Q” (Qms): 9.50 Total Speaker “Q” (Qts): 0.612 Equivalent Compliance (Vas): 0.61 cu. ft. (17.4 ltrs) One-Way, Linear Excursion (Xmax)*: 0.75 in. (19 mm) Thermal Power Handling (Pt): 500 Watts Continuous Reference Efficiency (no): 0.112 % Efficiency (SPL @ 1W/1m): 82.7 dB DC Resistance (Re): 2.78Ω Effective Piston Area (Sd): 38.0 sq. in. (0.0245 sq.
Driver Specifications Grille Clearance: 2.3125 in. (25 mm) from the bottom of the mounting flange to the lowest inside surface of the grille. Mounting Hardware: Twelve #8 x 1.00" long clear, zinc-plated steel Phillips pan-head sheet metal screws (included) or twelve #8-32 long steel Phillips pan-head machine screws with #8-32 T-Nuts, each at least 1/2-inch (12.5 mm) longer than the thickness of the mounting baffle (not included). Displacement: 0.06 cu. ft. (1.7 ltrs) Net Weight: 17 lbs. (7.
Input Sensitivity Setting Guide What follows is a simple method for accurately setting the input sensitivity (commonly referred to as “gain”) of JL Audio subwoofer amplifiers. You will need the following equipment: t AC Voltmeter (digital display type) t " $% XJUI B TJOF XBWF UFTU UPOF SFDPSEFE BU 0dB reference level in the frequency range to be amplified (40-50 Hz works well). Do not use attenuated test tones (-10dB, -20dB, etc.).
Limited Warranty JL AUDIO warrants this speaker to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty is not transferrable and applies only to the original purchaser of the product from an authorized JL AUDIO dealer.
HOME AUDIO | MOBILE AUDIO | MARINE AUDIO “JL Audio®” and the JL Audio logo are registered trademarks of JL Audio, Inc. “W7”, “VRC”, “OverRoll”, “W-Cone”, “Ahead of the Curve”, and their respective logos are trademarks of JL Audio, Inc. 4,6 t +-" t 1SJOUFE JO 64" t ª +- "VEJP *OD U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.