Owner's Manual

.
I ·s
~
:. ··• ·· ·
'••· ··
Clean the inside of the aluminum cap with acetone (not
included) prior to attaching it to the enclosure. Apply a
circular bead of silicone adhesive to the inside of the
aluminum lo o ca , 1/2-inch (13 mm) from the outer ed e.
q~Blue
V o Yellow ___ ___
Q ~Blue
v :i Yellow --_.
Align the aluminum logo cap to the desired angle of
rotation, and press it onto th e back of the enclosure.
Apply masking tape (not included) to hold the cap in
>lace until the silicone cures (at least 24 hours .
Example. One speaker pair of
LED circuits connected in parallel.
•
Fuse
• For marine installations , do not connect the speaker's LED lights to the vessel's navigational lighting circuits .
• For shon-drcuit protection , install a supplied fuseholder onto EACH speaker's BLUE ( i· l2V ) LED power connection lead.
• Connect all BLUE ( + 12V) leads together (parallel) and connect to a switched+ 12V supply . Connect all YELLOW (GND)
leads together and connect to a negative ground or to the NEGAT[VE battery post.
• We recommend activating the speakers ' LEDs thru a lighting c ircuit that supplies + 12V via an existing switch. If an
existing switched circuit is not available, you may install a dedicated toggle/rocker style switch that will s upply positive
( +12V) power . Fuse this connection according to how many LED circuits you have ( LED circuits x 150 mA. ).