Manual

Page 4 • JL Audio, Inc., 2016 Continued on Next Page
STEP 8
Remove the four T40 Torx screws from the base
of the rear upper panel.
STEP 7
Remove the two T40 Torx screws from the
center of the rear upper panel.
STEP 6
Pictured is the vehicle with the center console
removed.
STEP 5
Unclip and remove the two clips on the top of
the rear of the center console.
Pull up on the center console, guiding the seat
belt latches and parking brake handle through
the openings, and remove the center console.
STEP 4
Remove the two T40 Torx screws on the sides
of the console.
STEP 3
Unclip and remove the clip on the top of the
front of the center console.
STEP 2
Unclip and remove the clips on the sides of the
center console.
STEP 1
Empty the vehicle.
Lift up on the back of the seat bottom to
release the seats, and remove both seats from
vehicle.
SB-POL-RZG2R/10TW3 INSTR_SKU# 011463