Owner's Manual

Page 4 • JL Audio, Inc., 2019 Continued on Next Page
STEP 8
Fold the rear seats back down, then open and
lower the integrated center console.
STEP 7
Disconnect the indicated wiring harness under
the seat. Using an 18mm socket and wrench,
remove the two indicated rear seat bracket
bolts from the driver’s side rear seat.
STEP 6
Using an E12 socket and wrench, remove the
two front seat bracket bolts from the driver’s
side rear seat.
STEP 5
Carefully unclip and remove the storage
divider.
STEP 4
Using a 10mm socket and wrench, remove
the three screws from the side of the storage
divider bracket.
Repeat for the opposite side.
STEP 3
Turn the release handle to lower the storage
divider panel.
STEP 2
Fold the seat bottoms up.
STEP 1
Empty the rear seat area.
SB-D-5GRAMCCR/10TW3 INSTR_SKU# 011542